Home › Vehicle Exterior › BODY PANEL › CENTER BODY PILLAR(for LHD)
BM2850E _01 Vehicle Exterior _075893 BODY PANEL _0369065 CENTER BODY PILLAR(for LHD) F

BODY PANEL  CENTER BODY PILLAR(for LHD)  CUT AND JOIN REPLACEMENT SECTIONS  


K139973

With the side panel No.1 LH removed.


REMOVAL



Symbol Meaning
K108818

Remove Weld Points
K108828

Cut Location for Supply Parts

K147960C01
0.125,0.135 0.438,0.292 0.313,0.156 10 false *A
*A for Driver side - -


K147961C01
0.219,0.125 0.531,0.281 0.313,0.156 10 false *A
*A for Driver side - -


INSTALLATION


Symbol Meaning
K108823

Plug Weld
K108831

Butt Weld
K108834

Body Sealer


INSTALLATION POINT
1.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

2.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

3.

Before installing a new part, apply body sealer.

HINT:

Apply body sealer in an even, continuous bead.


4.

Before temporarily installing the new parts, weld the front body pillar lower outer and front body pillar sub-assembly outer with the standard number of welding points.

5.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.


K147962C01
2.292,2.854 3.146,2.563 3.146,2.563 3.406,2.563 false 2.146,1.906 2.688,1.365 2.688,1.365 2.927,1.365 false 0.25,0.219 0.563,0.375 0.313,0.156 10 false *A 2.969,1.271 3.281,1.427 0.313,0.156 10 false *1 3.458,2.49 3.771,2.646 0.313,0.156 10 false *2
*A for Driver side -
*1 FRONT BODY PILLAR SUB-ASSEMBLY OUTER *2 FRONT BODY PILLAR LOWER OUTER


K147963C01
0.24,0.188 0.552,0.344 0.313,0.156 10 false *A
*A for Driver side - -