Home › Vehicle Exterior › BODY PANEL › BACK DOOR OPENING SIDE REINFORCEMENT(for Double Swing Out Type)
BM2850E _01 Vehicle Exterior _075893 BODY PANEL _0369130 BACK DOOR OPENING SIDE REINFORCEMENT(for Double Swing Out Type) F

BODY PANEL  BACK DOOR OPENING SIDE REINFORCEMENT(for Double Swing Out Type)  CUT AND JOIN REPLACEMENT SECTIONS  


K139864

With the back door opening trough removed.


REMOVAL



Symbol Meaning
K108818

Remove Weld Points
K108820

Remove Weld Points
K108826

Cut with Disc Sander etc.
K108827

Cut and Join Location

K146245C02
0.125,8.646 0.438,8.802 0.313,0.156 10 false *a 3.135,1.083 4.052,1.406 0.917,0.323 10 false 140 (5.51)
*a mm (in.) - -


K146246

INSTALLATION



Symbol Meaning
K108821

Spot Weld
K108823

Plug Weld
K108825

Plug Weld
K108830

Fillet Weld
K108831

Butt Weld
K108834

Body Sealer

INSTALLATION POINT
1.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

2.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

3.

Before installing a new part, apply body sealer.

HINT:

Apply body sealer in an even, continuous bead.


4.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.


K146247C02
2.656,4.396 2.417,4.396 2.417,4.396 2.635,3.448 false 2.719,4.344 3.031,4.5 0.313,0.156 10 false *1 0.125,8.615 0.385,8.792 0.26,0.177 10 false *a 4.365,7.375 4.99,7.604 0.625,0.229 10 false 15 (0.59)
*1 NO.10 PILLAR SUB-ASSEMBLY - -
*a mm (in.) - -


K146248