Home › Vehicle Exterior › BODY PANEL › ROOF PANEL NO.7
BM2850E _01 Vehicle Exterior _075893 BODY PANEL _0369081 ROOF PANEL NO.7 F

BODY PANEL  ROOF PANEL NO.7  CUT AND JOIN REPLACEMENT SECTIONS  


K140023

With the roof panel No.3 removed.


REMOVAL


Symbol Meaning
K108818

Remove Weld Points
K108827

Cut and Join Location


K146302C02
1.219,0.677 1.531,0.833 0.313,0.156 10 false *1 3.656,0.677 3.969,0.833 0.313,0.156 10 false *2 5.729,0.688 6.042,0.844 0.313,0.156 10 false *3 0.146,8.594 0.458,8.75 0.313,0.156 10 false *a 0.958,3.323 1.552,3.531 0.594,0.208 10 false 95 (3.74)
*1 Rough Cut Panel *2 Grind
*3 After Removing - -
*a mm (in.) - -


INSTALLATION


Symbol Meaning
K108823

Plug Weld
K108825

Plug Weld
K108831

Butt Weld


INSTALLATION POINT
1.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

2.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

3.

Follow the welding conditions when welding *a to assure sufficient weld strength.

Plug Diameter Welding Wire Diameter Plug Welding Hole Pitch Shield Gas
4 mm (0.16 in.) 0.6 mm (0.02 in.) 25 mm (0.98 in.) Metal active gas (Ar 80% + CO2 20%))
5 mm (0.20 in.) 0.8 mm (0.03 in.) 30mm (1.18 in.)

4.

After welding, apply body sealer to the corresponding parts. (See the painting / coating)

5.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.


K146303C02
5.01,5.667 5.167,5.208 5.167,5.208 5.354,5.208 false 4.521,0.479 4.344,0.177 4.344,0.177 4.542,0.177 false 4.604,0.115 4.917,0.271 0.313,0.156 10 false *1 5.385,5.167 5.698,5.323 0.313,0.156 10 false *2 0.135,8.625 0.448,8.781 0.313,0.156 10 false *b 2.24,2.135 2.552,2.292 0.313,0.156 10 false *a 2.865,0.938 3.177,1.094 0.313,0.156 10 false *a 4.281,5.656 4.979,5.885 0.698,0.229 10 false 3.7 (0.15) 5.313,6.469 6.094,6.688 0.781,0.219 10 false 11.8 (0.46)
*1 NO.4 SIDE PANEL *2 Plug Welding Hole Center
*b mm (in.) - -