After using a degreasing agent to clean the surfaces of the body where the caution labels will beattached, attach the caution labels to the positions shown in the illustration.
Make sure the caution label is not attached over a spot weld.
When attaching the caution label, make sure not to touch the label's adhesive surface.
To prevent the edges of the caution label from peeling, apply extra pressure to the label's periphery.
If the work area's temperature is 5°C or less, the caution label's adhesive will deteriorate. It isrecommended that you heat the label to 20 to 40°C.
| *A | for LHD | - | - |
| *1 | CAUTION PLATE | *2 | CR LABEL |
| *3 | NAME LABEL | - | - |
| *A | for RHD | - | - |
| *1 | CAUTION PLATE | *2 | NAME LABEL |
| *3 | COMPLIANCE PLATE | *4 | EMERGENCY BACK DOOR CAUTION LABEL |
| *A | for RHD | - | - |
| *1 | EMERGENCY EXIT SIDE CAUTION LABEL | *2 | EMERGENCY EXIT CAUTION LABEL |