Home › Vehicle Exterior › BODY PANEL › FRONT PANEL › 2017.01–2018.07
BM2850E _01 Vehicle Exterior _075893 BODY PANEL _0371073 FRONT PANEL F

BODY PANEL  FRONT PANEL  ASSEMBLY REPLACEMENT  


K139847

REMOVAL



Symbol Meaning
K108818

Remove Weld Points

REMOVAL POINT
1.

*a in illustration above indicates where the adhesive is located.

2.

Roughly cut open the panel so that the adhesive can be reached. Cut through the adhesive with a cutchisel to remove the panel.

HINT:

In cases where the adhesive cannot be removed with a cut chisel, heat the adhesive with an industrialheater gun or gas burner taking care not to cause panel deformation by overheating.



K146102N01
3.042,5.844 3.552,6.938 false 3.552,6.938 3.542,5.844 false 3.563,6.938 4.083,5.823 false 3.542,6.938 3.802,6.938 false 3.854,6.885 4.167,7.083 0.313,0.198 10 false *a

INSTALLATION


Symbol Meaning
K108823

Plug Weld


INSTALLATION POINT
1.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

2.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

3.

Apply adhesive (3MTM AutomixTM Panel Bonding Adhesive #8115) to the area indicated by *a in the illustration.

HINT:
·

Apply a light coat of adhesive around the plug welding points.


·

Apply enough adhesive to the panels.



4.

After welding, apply body sealer to the corresponding parts. (See the painting / coating)

5.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.


K146103C01
3.563,2.354 3.365,1.063 3.365,1.063 3.677,1.063 false 3.5,7.021 3,5.833 false 3.5,7.031 3.531,5.854 false 3.51,7.031 3.99,5.833 false 3.5,7.031 3.76,7.031 false 3.74,1 4.052,1.198 0.313,0.198 10 false *1 3.802,6.958 4.115,7.156 0.313,0.198 10 false *a
*1 FRONT PANEL SUB-ASSEMBLY - -