With the front panel removed.
REMOVAL
| Symbol Meaning | |
|---|---|
|
Remove Weld Points |
|
Remove Weld Points |
*a and *b is reused.
After removing the *a and *b, remove the floor crossmember sub-assembly No.1.
| *A | LH | *B | RH |
| *A | LH Side | *B | RH Side |
| *1 | FLOOR CROSSMEMBER SUB-ASSEMBLY NO.1 | - | - |
INSTALLATION
| Symbol Meaning | |
|---|---|
|
Plug Weld |
|
Plug Weld |
Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.
After welding the floor crossmember sub-assembly No.1 to the vehicle side, install the *a and *b.
After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.
| *A | LH Side | *B | RH Side |
| *1 | FLOOR CROSSMEMBER SUB-ASSEMBLY NO.1 | - | - |
| *A | LH | *B | RH |