Be sure to apply body sealer to the body panel joints and door edges (tip of outer panel folded part), etc., to waterproof and rustproof them.
Apply degreasing agent to a clean cloth and clean the sealer application areas.
After removing the applied spot sealer from the sealer application areas using thinner or equivalent, rustproof the areas by applying primer or equivalent. Then apply body sealer.
If sealer is unnecessarily applied to an area, apply degreasing agent to a clean cloth and clean off the body sealer immediately.
|
Flat Finishing |
|
No Flat Finishing |
| *A | except Super Long Body | *B | for Glide Type |
| *C | for Folding Type | *D | w/ Emergency Step |
| *A | for Super Long Body | - | - |
| *A | except Super Long Body | *B | w/ Emergency Step |
| *A | for Super Long Body | - | - |
| *A | for Glide Type | - | - |
| *A | for Folding Type | - | - |
| *A | except Super Long Body | - | - |
| *A | for Super Long Body | - | - |
| *A | except Super Long Body | *B | for Luggage Compartment |
| *A | except Super Long Body | *B | for Double Swing Out Type |
| *A | for Super Long Body | - | - |
| *A | for LHD | *B | for Type A |
| *C | for Type B | - | - |
| *A | for RHD | *B | for Type A |
| *C | for Type B | - | - |
| *A | w/o LPG | - | - |
| *A | for Glide Type | - | - |
| *A | for Luggage Compartment | - | - |
| *A | for Double Swing Out Type | - | - |