With the roof panel No.1 removed.
REMOVAL
| Symbol Meaning | |
|---|---|
|
Remove Weld Points |
| *A | for Standard Body | - | - |
| *A | for Long Body | - | - |
| *A | for Super Long Body | - | - |
INSTALLATION
| Symbol Meaning | |
|---|---|
|
Plug Weld |
Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.
Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)
Before temporarily installing the new parts, weld the roof panel No.2 and room speaker bracket with the standard number of welding points. (w/ Roof Speaker)
After welding, apply body sealer to the corresponding parts. (See the painting / coating)
After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.
| *A | w/o Long Body | *B | w/ Roof Speaker |
| *1 | ROOF PANEL NO.2 | *2 | ROOM SPEAKER BRACKET |
| *A | for Long Body | *B | w/ Roof Speaker |
| *1 | ROOF PANEL NO.2 | *2 | ROOM SPEAKER BRACKET |
| *A | for Standard Body | - | - |
| *A | for Long Body | - | - |
| *A | for Super Long Body | - | - |
| *1 | ROOF PANEL NO.2 | *2 | ROOF PANEL REAR |