CONSTRUCTION
Rear Television Camera Assembly
The rear television camera assembly consists of a wide-angle lens and a Complementary Metal Oxide Semiconductor (CMOS).
An image captured by the rear view television camera lens is converted into electrical signals in accordance with the light intensity by using the CMOS image element, and the signals are then output to the radio and display receiver assembly.
| *1 | Wide-angle Lens | - | - |
OPERATION
Area Displayed on Screen
Objects on the right of the vehicle appear on the right side of the display panel, and objects on the left of the vehicle appear on the left side of the display panel.
The rear television camera assembly uses a wide-angle lens. The perceived distance from images that appear on the screen differs from the actual distance.
| *a | Area Displayed on Screen | *b | The illustrations shown are examples only. The illustrations may differ from the actual vehicle screens. |
The area displayed on the screen may vary in accordance with vehicle status or road conditions.
The area covered by the rear television camera assembly is limited. The rear television camera assembly does not show objects close to either corner of the bumper or show the area under the bumper.