Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › AIRBAG SYSTEM › 2017.01–2019.08
NM2850E _58 Vehicle Interior _074160 SUPPLEMENTAL RESTRAINT SYSTEMS _0361246 AIRBAG SYSTEM CO CONTROL F

SUPPLEMENTAL RESTRAINT SYSTEMS  AIRBAG SYSTEM  CONTROL  AIRBAG CONTROL  


FUNCTION OF MAIN COMPONENTS


a.

The SRS airbag system mainly consists of the parts listed in the table below.

Components Function

*1: Models with SRS front passenger airbag

*2: Models with CAN communication compatible airbag ECU assembly

Spiral Cable with Sensor Sub-assembly Inputs the signals from the airbag ECU assembly and outputs it to the SRS driver airbag (horn button assembly).
SRS Driver Airbag (Horn Button Assembly) These consist of an inflator, a bag, and so on. The inflator deploys gas in accordance with an expansion signal from the airbag ECU assembly and deploys the bag.
SRS Front Passenger Airbag (Instrument Panel Passenger Airbag Assembly)*1
Front Seat Outer Belt Assembly (Driver Side) The front seat outer belt assemblies are used to help reduce impact to the occupants.
Front Seat Outer Belt Assembly (Front Passenger Side)*1
Front Airbag Sensor Based on the deceleration of the vehicle during a frontal collision, a distortion is created in the sensor and converted into an electrical signal.
Airbag ECU Assembly The airbag ECU assembly receives signals from the deceleration sensor and safing sensor built into the airbag ECU assembly and the front airbag sensor, determines whether the driver airbag, front passenger airbag*1 and front seat belt pretensioners should be activated, and diagnoses system malfunctions.
Combination Meter Assembly The SRS airbag warning light turns on to alert the driver when the airbag ECU assembly detects a malfunction in the airbag system.
ECM*2 Stops the fuel pump when both of the SRS airbags have deployed.



OPERATING CONDITION


a.

Ignition Condition

i.

Deceleration sensors used for the airbag system are installed on various parts on the vehicle and calculate the deceleration rate of each part during a collision.


ii.

Depending on the situation, the airbag ECU assembly sends a deployment signal to each airbag based on the information from each sensor.


iii.

Frontal collision signals are produced based on the information from the airbag ECU assembly and front airbag sensor.

Frontal Collision
Y226503E01
1.25,1.25 2.667,1.583 1.417,0.333 10 false Airbag ECU Assembly 0.917,1.875 2.083,2.208 1.167,0.333 10 false Safing Sensor On 1,2.615 2.083,2.948 1.083,0.333 10 false Main Sensor On 3.146,2.167 3.479,2.5 0.333,0.333 10 false AND 0.833,3.615 2.333,3.948 1.5,0.333 10 false Front Airbag Sensor*1 0.167,5.333 3.083,5.667 2.917,0.333 10 false *2: Models with SRS Front Passenger Airbag 0.167,4.667 6.833,5.333 6.667,0.667 10 false *1: In case of a frontal collision, the ignition signal could be output with the deceleration sensor on signal even without a signal from the front airbag sensor. 4.417,3.333 6.5,4 2.083,0.667 10 false - Front Seat Outer Belt Assembly (Front Passenger Side)*2 4.417,2.583 6.5,3.25 2.083,0.667 10 false - Front Seat Outer Belt Assembly (Driver Side) 4.417,1.5 6.333,2.5 1.917,1 10 false - SRS Front Passenger Airbag (Instrument Panel Passenger Airbag Assembly)*2 4.417,0.75 6.5,1.417 2.083,0.667 10 false - SRS Driver Airbag (Horn Button Assembly)




SYSTEM CONTROL


a.

Airbag for Frontal Collision

i.

For frontal collisions, there are 2 airbags and 2 seat belt pretensioners: the SRS driver airbag (horn button assembly), SRS front passenger airbag (instrument panel passenger airbag assembly)*, front seat outer belt assembly (driver side), and front seat outer belt assembly (front passenger side)*. The deployment of the airbags and the activation of the pretensioners occur simultaneously.

*: Models with SRS front passenger airbag


Y226504E01
0.667,6.333 2.417,6.667 1.75,0.333 10 false : CAN Communication Line 0.167,7.417 4.583,7.75 4.417,0.333 10 false *3: Models with CAN Communication Compatible Airbag ECU Assembly 0.167,7.083 4.75,7.417 4.583,0.333 10 false *2: Models with CAN Communication Incompatible Airbag ECU Assembly 0.167,6.75 3,7.083 2.833,0.333 10 false *1: Models with SRS Front Passenger Airbag 1.333,5.5 1.75,5.833 0.417,0.333 10 false ECM 0.583,4.75 2.333,5.083 1.75,0.333 10 false - SRS Airbag Warning Light 0.583,4.417 2.417,4.75 1.833,0.333 10 false Combination Meter Assembly 2.917,4.677 3.167,4.844 0.25,0.167 10 false *3 4.896,4.781 6.896,5.448 2,0.667 10 false Front Seat Outer Belt Assembly (Front Passenger Side)*1 4.865,3.583 6.865,4.25 2,0.667 10 false Front Seat Outer Belt Assembly (Driver Side) 4.969,2.146 6.802,3.146 1.833,1 10 false SRS Front Passenger Airbag (Instrument Panel Passenger Airbag Assembly)*1 5.125,1.042 6.708,1.708 1.583,0.667 10 false SRS Driver Airbag (Horn Button Assembly) 3.417,3.083 4.25,3.75 0.833,0.667 10 false Airbag ECU Assembly 0.583,2.083 1.25,2.417 0.667,0.333 10 false Impact 0.531,0.625 1.198,0.958 0.667,0.333 10 false Collision 1.667,0.75 2.5,1.417 0.833,0.667 10 false Front Airbag Sensor 2.917,4.146 3.167,4.313 0.25,0.167 10 false *2



b.

Primary Check Illumination Control

i.

After the ignition switch is on (IG), the airbag ECU assembly illuminates the SRS airbag warning light in the combination meter assembly for approximately 6 seconds and conducts the primary check. During the primary check, the ignition of airbags is prohibited and a diagnosis of the airbag ECU assembly is performed. If trouble is detected during the primary check, the SRS airbag warning light remains on even after the 6 seconds have elapsed. See the illustration below.

Y226505E01
0.583,0.5 1.583,0.833 1,0.333 10 false Ignition Switch 0.25,1.667 1.583,2.333 1.333,0.667 10 false SRS Airbag Warning Light 1.75,0.417 2,0.75 0.25,0.333 10 false ON 1.667,0.75 2,1.083 0.333,0.333 10 false OFF 3.083,1.146 4.083,1.479 1,0.333 10 false Approx. 6 sec. 3.667,2.25 7.083,2.583 3.417,0.333 10 false ON/OFF condition depends on the primary check result. 1.75,1.583 2,1.917 0.25,0.333 10 false ON 1.667,1.917 2,2.25 0.333,0.333 10 false OFF




DIAGNOSIS


a.

If the airbag ECU assembly detects a malfunction in the SRS airbag system, the airbag ECU assembly stores the malfunction data in memory, in addition to illuminating the SRS airbag warning light.


b.

If the SRS airbag deploys, the airbag ECU assembly will turn on the SRS airbag warning light. However, different from the ordinary diagnosis function, a DTC will not be stored. The SRS airbag warning light cannot be turned off. It is necessary to replace the airbag ECU assembly with a new one.


c.

The 5-digit DTC can be read after connecting the Grobal TechStream (GTS) to the DLC3. For details, refer to the repair manual.

Y226506E01
0.833,1.25 1.333,1.583 0.5,0.333 10 false DLC3 2.74,1.25 4.156,1.583 1.417,0.333 10 false Airbag ECU Assembly 4.885,0.833 6.719,1.167 1.833,0.333 10 false Combination Meter Assembly 4.917,1.333 6.667,1.667 1.75,0.333 10 false - SRS Airbag Warning Light