Home › Drivetrain › A444E (AUTOMATIC TRANSMISSION / TRANSAXLE) › AUTOMATIC TRANSMISSION SYSTEM › 2017.01–2021.01
NM2850E _52 Drivetrain _073406 A444E AUTOMATIC TRANSMISSION / TRANSAXLE _0357364 AUTOMATIC TRANSMISSION SYSTEM DE DETAILS F

A444E AUTOMATIC TRANSMISSION / TRANSAXLE  AUTOMATIC TRANSMISSION SYSTEM  DETAILS  SHIFT SOLENOID VALVE  


CONSTRUCTION


a.

Solenoid Valve SLT

i.

In order to provide a hydraulic pressure that is proportion to current that flows to the solenoid coil, the solenoid valve SLT linearly controls the line pressure based on the signals it receives from the ECT ECU.

X141557E01
1.417,1.271 1.083,0.667 true 1.635,2.042 1.896,1.438 true 2.813,1.167 3.021,0.427 true 0.615,0.583 1.198,1 0.583,0.417 10 false Sleeve 1.271,2.042 2.271,2.271 1,0.229 10 false Spool Valve 3.052,0.323 4.01,0.688 0.958,0.365 10 false Solenoid Coil 3.792,1.042 4.427,1.625 0.635,0.583 10 false Hydraulic Pressure 5.063,2.26 5.75,2.792 0.688,0.531 10 false Current 1.542,2.469 3.25,2.792 1.708,0.323 10 false Solenoid Valve SLT



b.

Solenoid Valves S1, S2, SL and ST

i.

The solenoid valves S1, S2, SL, and ST use a 2-way solenoid valve.

X141558E01
3.938,1.521 4.333,1.813 0.396,0.292 10 false IN 4.021,1.781 4.438,2.083 0.417,0.302 10 false OUT 1.167,2.208 2.427,2.563 1.26,0.354 10 false Solenoid Valve OFF 4.667,2.26 6.135,2.542 1.469,0.281 10 false Solenoid Valve ON

Function of Solenoid Valve S1, S2, SL and ST
Solenoid Valve Function
S1 Controls the hydraulic pressure applied to each shift valve for gear shifting depending on the ECT ECU signal.
S2
SL Controls the hydraulic pressure applied to the rear of the lock-up clutch for lock-up timing depending on the ECT ECU signal.
ST Controls the hydraulic pressure applied to each shift valve by way of ECT ECU signals to regulate gear shift timing.