OUTLINE
The A444E automatic transmission is used. This automatic transmission is 4-speed ECT (Electronic Controlled Transmission).
The solenoid valve SLT is used to control the line pressure.
SPECIFICATION
|
*: Weight shows the figure with the fluid fully filled. |
||
| Transmission Type | A444E | |
| Gear Ratio | 1st | 2.950 |
| 2nd | 1.530 | |
| 3rd | 1.000 | |
| 4th | 0.703 | |
| Reverse | 2.678 | |
| Fluid Capacity Liters | 13.9 Liters (14.7 US qts, 12.4 Imp. qts) | |
| Fluid Type | Toyota Genuine ATF Type D-II | |
| Weight (Reference)* | 131.0 kg (288.2 lb) | |
| C0 | OD Direct Clutch | The No. of Discs | 3 |
| C1 | Forward Clutch | 7 | |
| C2 | Direct Clutch | 5 | |
| B0 | OD Brake | 3 | |
| B2 | 2nd Brake | 5 | |
| B3 | 1st & Reverse Brake | 6 | |
| F0 | OD One-way Clutch | The No. of Ring Gear Teeth | 22 |
| F2 | No. 2 One-way Clutch | 46 |
| Front Planetary Gear | The No. of Sun Gear Teeth | 28 |
| The No. of Pinion Gear Teeth | 23 | |
| The No. of Ring Gear Teeth | 75 | |
| Rear Planetary Gear | The No. of Sun Gear Teeth | 44 |
| The No. of Pinion Gear Teeth | 20 | |
| The No. of Ring Gear Teeth | 83 | |
| OD Planetary Gear | The No. of Sun Gear Teeth | 38 |
| The No. of Pinion Gear Teeth | 26 | |
| The No. of Ring Gear Teeth | 90 |
| Type | 3-element, 1-step, 2-phase |
| Stall Torque Ratio | 1.86 |