GENERAL
The two-part type is used in the short wheel base models, and the three-part type is uesd in the long wheel base models. They are both equipped with the same Hook's universal joint used in the previous models.
| Propeller Shaft Type | Two-Part | ← | ← | Three-Part | ← | ← | ← | |
| Wheel Base | Short | ← | ← | Long | ← | ← | ← | |
| Transmission | M152 | M156 | M551 | M155 | M156 | M551 | A444E | |
| Outer Diameter | A | 68.9 mm (2.71 in.) | ← | 75.0 mm (2.95 in.) | ← | 68.9 mm (2.71 in.) | 75.0 mm (2.95 in.) | ← |
| B | - | - | - | 75.0 mm (2.95 in.) | ← | ← | ← | |
| C | 75.0 mm (2.95 in.) | ← | ← | ← | ← | ← | ← | |
| Joint Distance | L1 | 924.8 mm (36.38 in.) | 1001.8 mm (39.44 in.) | 772.8 mm (30.43 in.) | 956.8 mm (37.64 in.) | 1040.8 mm (40.98 in.) | 816.8 mm (32.16 in.) | 809.8 mm (31.88 in.) |
| L2 | - | - | - | 678.8 mm (26.72 in.) | ← | ← | ← | |
| L3 | 1123.2 mm (44.22 in.) | ← | ← | 1143.4 mm (45.02 in.) | ← | ← | ← | |