Home › Engine / Hybrid System › 2TR-FE (ENGINE MECHANICAL) › ENGINE UNIT
NM2850E _51 Engine / Hybrid System _074206 2TR-FE ENGINE MECHANICAL _0361606 ENGINE UNIT DE DETAILS F

2TR-FE ENGINE MECHANICAL  ENGINE UNIT  DETAILS  CYLINDER HEAD  


CONSTRUCTION


a.

The cylinder head, which is made of aluminum alloy, contains a pentroof type combustion chamber. The spark plug has been located in the center of the combustion chamber in order to improve the engine's anti-knocking performance.


b.

The angle between the intake and exhaust valves is narrowed and set at 22.85° to permit a compact cylinder head.


c.

A cross-flow intake and exhaust layout is used to improve intake and exhaust efficiency.


d.

A taper squish combustion chamber is used to improve anti-knocking performance and intake efficiency. In addition, engine performance and fuel economy have been improved.


e.

Long nozzle type fuel injector assemblies are installed in the cylinder head to reduce the distance from the fuel injector to the intake valve, thus preventing the fuel from adhering to the intake port walls, and reducing exhaust emissions.


f.

The routing of the water jacket in the cylinder head is optimized to achieve higher cooling performance.


g.

Plastic region tightening bolts are used for the cylinder head.

W139593C01
4.01,1.26 4.01,0.792 4.01,0.792 4.167,0.792 true 2.063,2.833 2.063,3.469 2.063,3.469 3.406,3.469 true 5.51,1.167 5.51,0.573 5.51,0.573 5.667,0.573 true 6.167,1.75 6.167,1.167 6.167,1.167 6.323,1.167 true 2.979,2.823 2.979,3.469 true 4.198,0.677 4.417,0.896 0.219,0.219 10 false *1 3.448,3.344 3.667,3.563 0.219,0.219 10 false *a 2.333,0.229 2.927,0.448 0.594,0.219 10 false 22.85° 5.708,0.458 5.927,0.677 0.219,0.219 10 false *b 6.365,1.083 6.583,1.302 0.219,0.219 10 false *c
*1 Fuel Injector Assembly - -
*a Taper Squish *b Long Nozzle Type
*c Conventional Type - -
V100144

Water Jacket - -