Home › Engine / Hybrid System › 2TR-FE (ENGINE MECHANICAL) › ENGINE UNIT
NM2850E _51 Engine / Hybrid System _074206 2TR-FE ENGINE MECHANICAL _0361606 ENGINE UNIT GE GENERAL F

2TR-FE ENGINE MECHANICAL  ENGINE UNIT  GENERAL  GENERAL  


OUTLINE


a.

The 2TR-FE engine is an in-line 4-cylinder, 2.7-liter, 16-valve DOHC engine.


b.

On this engine, the Variable Valve Timing-intelligent (VVT-i) system and Electronic Throttle Control System-intelligent (ETCS-i) are used. These control functions have been optimized to further improve engine performance and fuel economy, and to reduce exhaust emissions.



SPECIFICATION


No. of Cyls. and Arrangement 4-cylinder, In-line
Valve Mechanism 16-valve DOHC, Chain Drive (with VVT-i)
Combustion Chamber Pentroof Type
Manifolds Cross-flow
Fuel System Sequential Multiport Fuel Injection (SFI)
Ignition System Direct Ignition System (DIS)
Displacement 2694 cm3 (164.4 cu. in.)
Bore x Stroke 95.0 mm x 95.0 mm (3.74 in. x 3.74 in.)
Compression Ratio 9.6 : 1
Max. Output [SAE-NET] 108 kW @ 4800 rpm
Max. Torque [SAE-NET] 235 N*m @ 3800 rpm
Valve Timing Intake Open 0° to 35° BTDC
Closed 64° to 29° ABDC
Exhaust Open 44° BBDC
Closed 8° ATDC
Spark Plug Manufacturer DENSO
Type SK20HR-A11
Plug Gap 1.0 mm to 1.1 mm (0.0394 in. to 0.0433 in.)
Firing Order 1 - 3 - 4 - 2
Research Octane Number 90 or higher
Emission Regulation*1 EURO 4
-
Engine Service Mass (Reference)*2 157 kg (346 lb)

HINT:

*1: Emission regulations differ by country and region.

*2: Weight shows the figure with oil and coolant fully filled.



MAIN FEATURES


a.

This engine has been able to achieve the following performance features through the use of the items listed below:

i.

High performance and fuel economy


ii.

Low noise and vibration


iii.

Lightweight and compact design


iv.

Good serviceability


v.

Clean emissions

Item (1) (2) (3) (4) (5)
Engine Proper A cylinder head cover made of plastic is used. - ○ ○ - -
A taper squish shape is used for the combustion chamber. ○ - - - ○
2 balance shafts are used. - ○ - - -
The piston skirt is coated with resin. ○ ○ - - -
A No. 1 oil pan made of aluminum alloy is used. ○ ○ ○ - -
Valve Mechanism Timing chains and chain tensioners are used. ○ - ○ ○ -
Valve lash adjuster assemblies are used. ○ ○ - ○ ○
Valve rocker arm sub-assemblies are used. ○ - - - ○
Intake and Exhaust System An intake manifold made of plastic is used. - - ○ - -
A linkless-type throttle body is used. - - ○ ○ -
A Three-Way Catalysts (TWCs) are used. - - - - ○
Fuel System Long nozzle, 12-hole type fuel injector assemblies are used to improve the atomization of fuel. ○ - - - ○
Quick connectors are used to connect the fuel hose with the fuel pipe. - - - ○ -
Ignition System Long-reach type spark plugs are used. ○ - - - -
Engine Control System The Electronic Throttle Control System-intelligent (ETCS-i) is used. ○ - - - ○
The Direct Ignition System (DIS) makes ignition timing adjustment unnecessary. ○ - - ○ ○
The Variable Valve Timing-intelligent (VVT-i) system is used. ○ - - - ○