CONSTRUCTION
This controller consists of a housing driven by the timing chain and a vane coupled with the intake camshaft. The oil pressure sent from the advance or retard side path at the intake camshaft causes rotation in the VVT-i controller vane circumferential direction to vary the intake valve timing continuously.
When the engine is stopped, the intake camshaft will be in the most retarded state to ensure startability. When hydraulic pressure is not applied to the VVT-i controller immediately after the engine has started, the lock pin locks the movement of the VVT-i controller to prevent a knocking noise. Thereafter, when hydraulic pressure is applied to the VVT-i controller, the lock pin is released.
| *1 | Lock Pin | *2 | Timing Rotor |
| *3 | Outer Housing | *4 | Vane (Coupled to Intake Camshaft) |
| *5 | Timing Chain Sprocket | *6 | Intake Camshaft |
| *a | Engine Operating | *b | Engine Stopped |
|
Oil Pressure | - | - |
OPERATION
Advance
When the camshaft timing oil control valve assembly is positioned as illustrated below by the advance signals from the ECM, the resultant oil pressure is applied to the timing advance side vane chamber to rotate the camshaft in the timing advance direction:
| *1 | Vane | *2 | ECM |
| *a | Rotation Direction | *b | In (Oil Pressure) |
| *c | Drain (Oil Pressure) | - | - |
Retard
When the camshaft timing oil control valve assembly is positioned as illustrated below by the retard signals from the ECM, the resultant oil pressure is applied to the timing retard side vane chamber to rotate the camshaft in the timing retard direction:
| *1 | Vane | *2 | ECM |
| *a | Rotation Direction | *b | Drain (Oil Pressure) |
| *c | In (Oil Pressure) | - | - |
Hold
After reaching the target timing, the valve timing is held by keeping the camshaft timing oil control valve assembly in the neutral position unless the traveling state changes. This adjusts the valve timing at the desired target position and prevents the engine oil from running out when it is unnecessary.