FUNCTION
The VVT-i system is designed to control the intake camshaft within a range of 45° (of crankshaft angle) to provide valve timing that is optimally suited to the engine condition. This improves torque in all the speed ranges as well as increasing fuel economy and reducing exhaust emissions.
| *1 | Camshaft Position Sensor | *2 | Camshaft Timing Oil Control Valve Assembly |
| *3 | Engine Coolant Temperature Sensor | *4 | Crankshaft Position Sensor |
| *5 | ECM | *6 | Intake Mass Air Flow Meter Sub-assembly |
| *7 | Throttle Position Sensor | - | - |
Using the engine speed, intake air volume, throttle position and water temperature, the engine ECU can calculate optimal valve timing under each driving condition and control the camshaft timing oil control valve. In addition, the engine ECU uses signals from the camshaft position sensor and the crankshaft position sensor to detect the actual valve timing, thus providing feedback control to achieve the target valve timing.
The VVT-i system delivers excellent benefits in the different operating conditions as shown in the table below:
| Operation State | Objective | Effect | |
|---|---|---|---|
| During Idling |
2.344,0.073 3.333,0.271
0.99,0.198
10
false
Latest Timing
1.552,0.125 1.948,0.302
0.396,0.177
10
false
TDC
0.76,0.938 1.042,1.083
0.281,0.146
10
false
EX
2.51,0.958 2.906,1.135
0.396,0.177
10
false
IN
1.542,1.906 1.938,2.083
0.396,0.177
10
false
BDC
|
Eliminating overlap reduces blow back to the intake side. | ·
Stabilized idling speed ·
Better fuel economy |
| At Light Load |
2.042,0.156 3,0.333
0.958,0.177
10
false
To Retard Side
1.542,0.115 1.885,0.271
0.344,0.156
10
false
TDC
0.719,1.01 0.927,1.167
0.208,0.156
10
false
EX
2.51,1.01 2.854,1.167
0.344,0.156
10
false
IN
1.521,1.917 1.865,2.073
0.344,0.156
10
false
BDC
|
Decreasing overlap to reduce blow back to the intake side. | Ensured engine stability |
| At Medium Load |
0.51,0.156 1.25,0.5
0.74,0.344
10
false
To Advance Side
1.542,0.104 1.844,0.302
0.302,0.198
10
false
TDC
2.49,1 2.792,1.198
0.302,0.198
10
false
IN
0.75,1 0.969,1.167
0.219,0.167
10
false
EX
1.531,1.927 1.969,2.125
0.438,0.198
10
false
BDC
|
Increasing overlap to increase internal EGR to reduce pumping loss. | ·
Better fuel economy ·
Improved emission control |
| In Low to Medium Speed Range with Heavy Load |
2.229,1.625 2.948,2
0.719,0.375
10
false
To Advance Side
1.542,0.104 1.875,0.313
0.333,0.208
10
false
TDC
0.74,1.01 1.073,1.219
0.333,0.208
10
false
EX
2.5,1 2.833,1.208
0.333,0.208
10
false
IN
1.521,1.917 1.854,2.125
0.333,0.208
10
false
BDC
|
Advancing the intake valve close timing for volumetric efficiency improvement. | Improved torque in low to medium speed range |
| In High Speed Range with Heavy Load |
0.542,1.646 1.167,2
0.625,0.354
10
false
To Retard Side
1.542,0.063 1.917,0.25
0.375,0.188
10
false
TDC
2.5,0.896 2.708,1.083
0.208,0.188
10
false
IN
0.677,0.917 0.927,1.083
0.25,0.167
10
false
EX
1.5,1.979 1.875,2.167
0.375,0.188
10
false
BDC
|
Retarding the intake valve close timing for volumetric efficiency improvement. | Improved output |
| At Low Temperatures |
2.344,0.073 3.333,0.271
0.99,0.198
10
false
Latest Timing
1.552,0.125 1.948,0.302
0.396,0.177
10
false
TDC
0.76,0.938 1.042,1.083
0.281,0.146
10
false
EX
2.51,0.958 2.906,1.135
0.396,0.177
10
false
IN
1.542,1.906 1.938,2.083
0.396,0.177
10
false
BDC
|
Decreasing overlap to reduce blow back to the intake side leads to the lean burning condition, and stabilizes the idling speed at fast idle. | ·
Stabilized fast idle speed ·
Better fuel economy |
·
Starting Engine ·
Stopping Engine |
2.344,0.073 3.333,0.271
0.99,0.198
10
false
Latest Timing
1.552,0.125 1.948,0.302
0.396,0.177
10
false
TDC
0.76,0.938 1.042,1.083
0.281,0.146
10
false
EX
2.51,0.958 2.906,1.135
0.396,0.177
10
false
IN
1.542,1.906 1.938,2.083
0.396,0.177
10
false
BDC
|
Decreasing overlap to reduce blow back to the intake side. | Improved startability |