OUTLINE
The cooling system uses a pressurized forced circulation system with pressurized type reservoir tank.
A pressurized reservoir tank is used to prevent the water from deteriorating upon contact with external air.
A thermostat with an air bypass valve is located on the water inlet housing to maintain suitable temperature distribution in the cooling system.
A water pump swirl chamber and a thermostat housing have been placed in the timing chain cover to achieve a simple construction and a compact engine.
An aluminum radiator core is used for weight reduction.
The water bypass pipe made of plastic is used for weight reduction.
The TOYOTA genuine Super Long Life Coolant (SLLC) is used at factory fill.
SPECIFICATION
Engine Coolant
Toyota Genuine SLLC is used. The maintenance intervals are as shown in the table below:
| Engine Coolant Type | Toyota Genuine Super Long Life Coolant (SLLC) or similar high quality ethylene glycol based non-silicate, non-amine, non-nitrite and non-borate coolant with long-life hybrid organic acid technology (coolant with long-life hybrid organic acid technology is a combination of low phosphates and organic acids). Do not use plain water alone. | |
| Maintenance Intervals | First Time | 160000 km (100000 miles) |
| Subsequent | Every 80000 km (50000 miles) | |
| Color | Pink | |
SLLC is pre-mixed (50% coolant and 50% deionized water), and therefore does not need to be diluted.
Thermostat
| Thermostat Opening Temperature | 80°C to 84°C (176°F to 183°F) |