SYSTEM CONTROL
The distribution of the brake force, which was performed mechanically in the past, is now performed under electrical control of the skid control ECU, which precisely controls the braking force in accordance with the vehicle's driving conditions.
Front/Rear Wheel Brake Force Distribution
If the brakes are applied while the vehicle is moving straight forward, the transfer of load due to braking reduces the load that is applied to the rear wheels. The skid control ECU determines this condition by way of the signals from the speed sensor, and the brake actuator regulates the distribution of the brake force of the rear wheels to optimally control brake balance.
For example, the amount of the brake force that can be applied to the rear wheels during braking varies depending on whether the vehicle is carrying a load. The amount of the brake force that is applied to the rear wheels also varies in accordance with the extent of the deceleration.
Thus, the distribution of brake force to the rear is optimally controlled in order to effectively utilize the braking force of the rear wheels under these conditions.
Right/Left Wheel Brake Force Distribution (During Cornering Braking)
During braking while cornering, this function controls the brake force that acts on the left and right wheels in accordance with the vehicle conditions at that time. This ensures vehicle stability and excellent braking performance.