Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › BRAKE CONTROL SYSTEM (w/ ABS)
NM2850E _54 Brake _073399 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0357377 BRAKE CONTROL SYSTEM(w/ ABS) CO CONTROL F

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  BRAKE CONTROL SYSTEM(w/ ABS)  CONTROL  POWER ASSIST BRAKE  


SYSTEM CONTROL


a.

In certain situations when the vacuum pressure of the vacuum booster calculated using the vacuum sensor and master cylinder pressure sensor is low, the skid control ECU may provide brake assist. Or in the event of a brake booster failure, based on the brake pedal load sensing switch and master cylinder pressure sensor signal, the skid control ECU may provide brake assist.


b.

If the skid control ECU judges the need for additional brake assist, pressure is generated by the pump in the brake actuator and directed to the wheel cylinder to apply a large amount of fluid pressure.

Effects of the Braking Force Assist Control Function
X141222E01
4.198,1.417 4.479,1.167 4.479,1.167 4.813,1.167 true 2.167,2.146 2.5,2.146 true 3.448,1.292 3.75,0.667 3.75,0.667 4.083,0.667 true 5.292,2.76 5.896,3.094 0.604,0.333 10 false Time 4.875,1.094 6.229,1.844 1.354,0.75 10 false Fluid Pressure Inside The Wheel Cylinder 2.552,2.063 3.969,2.729 1.417,0.667 10 false Fluid Pressure Inside The Master Cylinder 0.177,1.792 1.594,2.479 1.417,0.688 10 false Assistance Limit Point By The Brake Booster 0.76,0.802 1.667,1.229 0.906,0.427 10 false Brake Force 4.135,0.583 5.042,1.01 0.906,0.427 10 false Increase

Effects of the Servo Failure Assist Control Function
X141223E01
5.635,2.146 6.979,2.865 1.344,0.719 10 false Servo Loss (During a Malfunction) 3.948,2.135 5.427,2.479 1.479,0.344 10 false with Servo Loss Control 3.74,2.604 5.427,2.958 1.688,0.354 10 false without Servo Loss Control 2.469,1.125 4.906,1.51 2.438,0.385 10 false Servo Normal (During Usual Operation) 2.469,3.073 3.865,3.448 1.396,0.375 10 false Pedal Pressing Power 0.75,1.844 1.635,2.229 0.885,0.385 10 false Deceleration