OUTLINE
The dry hydraulic single-plate clutch used in the previous model is also used in the new model with the following changes made.
The cooling action of the clutch area has been made more efficient through the adoption of cooling grooves and fins in the clutch cover, and cooling apertures in the clutch housing.
SPECIFICATIONS
|
*1: DST (Diaphragm spring turnover) *2: Outer diameter x inner diameter x thickness |
||||
| Engine Type | 14B | 1HZ | 1BZ-FPE | |
| Clutch | Type | Dry Type Single Plate Clutch Diaphragm Spring | ← | ← |
| Operation | Hydraulic | ← | ← | |
| Clutch Cover | Type | DST*1 | ← | ← |
| Size | 278mm (10.94 in.) | ← | 300 mm (11.81 in.) | |
| Clutch Disc | Facing size*2 | 275 mm X 175 mm X 3.5 mm (10.83 in. X 6.89 in. X 0.14 in.) | ← | 300 mm X 190 mm X 3.5 mm (11.81 in. X 7.48 in. X 0.14 in.) |
| Facing Area | 353 cm2 (54.7 in.2) | ← | 423 cm2 (65.6 in.2) | |
| Master Cylinder | Type | Conventional | ← | ← |
| Cylinder Dia. | 15.87 mm (0.62 in.) | ← | ← | |
| Release Cylinder | Type | Non-adjustable | ← | ← |
| Cylinder Dia. | 20.64 mm (0.81 in.) | 19.05 mm (0.75 in.) | ← | |
|
*1: DST (Diaphragm spring turnover) *2: Outer diameter x inner diameter x thickness |
|||
| Engine Type | N04C-UH or N04C-VL or N04C-VQ | 2TR-FE | |
| Clutch | Type | Dry Type Single Plate Clutch Diaphragm Spring | ← |
| Operation | Hydraulic | ← | |
| Clutch Cover | Type | DST*1 | ← |
| Size | 300 mm (11.81 in.) | 260 mm (10.24 in.) | |
| Clutch Disc | Facing size*2 | 300 mm X 190 mm X 3.5 mm (11.81 in. X 7.48 in. X 0.14 in.) | 250 mm X 150 mm X 3.5 mm (9.84 in. x 6.30 in. x 0.14 in.) |
| Facing Area | 423 cm2 (65.6 in.2) | 289.8 cm2 (44.92 in.2) | |
| Master Cylinder | Type | Conventional | ← |
| Cylinder Dia. | 15.87 mm (0.62 in.) | ← | |
| Release Cylinder | Type | Non-adjustable | ← |
| Cylinder Dia. | 19.05 mm (0.75 in.) | 22.2 mm (0.87 in.) | |