Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › BRAKE CONTROL SYSTEM(w/ VSC) › 2017.01–2018.07
NM2850E _54 Brake _073399 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0363235 BRAKE CONTROL SYSTEM(w/ VSC) DE DETAILS F

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  BRAKE CONTROL SYSTEM(w/ VSC)  DETAILS  BRAKE ACTUATOR  


CONSTRUCTION


a.

A brake actuator assembly integrated with a skid control computer was employed for vehicles with an VSC that uses CAN communication. The brake actuator assembly has a small size and light weight while still having sufficient ejection performance and guarantees excellent safety and running performance even for heavy vehicles.


b.

The brake actuator assembly consists of the actuator, skid control ECU, solenoid relay, pump motor, and master cylinder pressure sensor.

X141239C01
1.708,1.219 2.615,1.521 true 4.479,1.625 5.385,1.927 true 1.552,1.125 1.865,1.323 0.313,0.198 10 false *a 5.427,1.844 5.74,2.042 0.313,0.198 10 false *b
*a Actuator Portion *b Skid Control ECU



c.

The actuator portion consists of 10 solenoid valves, 2 pressure regulator valves, 2 pump, 2 reservoirs, and master cylinder pressure sensor.


d.

The 10 solenoid valves consist of 2 master cylinder cut solenoid valves [(1), (2)], 4 pressure holding solenoid valves [(3), (4), (5), (6)], and 4 pressure reduction solenoid valves [(7), (8), (9), (10)].

Hydraulic Circuit
X141240C01
3.094,4.323 3.583,3.979 3.583,3.979 4.125,4.313 true 3.188,5.771 3.573,5.542 3.573,5.542 3.99,5.781 true 3.167,6.385 3.594,6.635 3.594,6.635 4.021,6.385 true 2.792,0.292 3.135,0.542 0.344,0.25 10 false *1 0.531,1.375 0.875,1.625 0.344,0.25 10 false *2 1.688,1.625 2.031,1.875 0.344,0.25 10 false *3 3.5,3.813 3.844,4.063 0.344,0.25 10 false *4 3.5,5.375 3.844,5.625 0.344,0.25 10 false *5 3.521,6.646 3.865,6.896 0.344,0.25 10 false *6 0.865,7.458 1.208,7.708 0.344,0.25 10 false *7 2.719,7.458 3.063,7.708 0.344,0.25 10 false *8 4.313,7.458 4.667,7.708 0.354,0.25 10 false *9 6.104,7.458 6.458,7.708 0.354,0.25 10 false *10 1.135,3.104 1.479,3.354 0.344,0.25 10 false (1) 5.938,3.104 6.281,3.354 0.344,0.25 10 false (2) 1.365,4.594 1.708,4.844 0.344,0.25 10 false (3) 4.802,4.583 5.146,4.833 0.344,0.25 10 false (5) 2.271,4.594 2.615,4.844 0.344,0.25 10 false (4) 5.698,4.594 6.042,4.844 0.344,0.25 10 false (6) 1.354,5.74 1.698,5.99 0.344,0.25 10 false (7) 2.271,5.74 2.615,5.99 0.344,0.25 10 false (8) 4.792,5.729 5.135,5.979 0.344,0.25 10 false (9) 5.698,5.74 6.042,5.99 0.344,0.25 10 false (10)
*1 Brake Master Cylinder Sub-assembly *2 Brake Actuator Assembly
*3 Master Cylinder Pressure Sensor *4 Pump
*5 Pressure Regulator Valves *6 Reservoirs
*7 Rear Left Wheel Cylinder *8 Rear Right Wheel Cylinder
*9 Front Left Wheel Cylinder *10 Front Right Wheel Cylinder




OPERATION


a.

ABS with EBD Operation

i.

Based on the signals received from the 4 wheel speed sensors and yaw rate and deceleration sensor, the skid control ECU calculates the wheel rotation speed and deceleration for each wheel, in order to check for a wheel slippage condition. According to the slippage condition, the ECU controls the pressure holding solenoid valves and pressure reduction solenoid valves in order to adjust the fluid pressure of the brakes for each of the wheels in the following 3 modes: pressure reduction, pressure holding, and pressure increase modes.

X141247E01
2.583,1.917 2.833,1.917 2.833,1.917 3,2.25 true 3,3.167 2.833,3.917 2.833,3.917 2.583,3.917 true 0.792,0.417 1.75,0.802 0.958,0.385 10 false Not Activated 2.302,0.417 3.333,0.802 1.031,0.385 10 false Normal Braking 4.333,0.417 4.667,0.833 0.333,0.417 10 false - 5.917,0.417 6.25,0.833 0.333,0.417 10 false - 0.906,1.25 1.865,1.635 0.958,0.385 10 false Activated 2.229,1.167 3.354,1.833 1.125,0.667 10 false Pressure Increase Mode 3.833,1.167 4.917,1.833 1.083,0.667 10 false Pressure Holding Mode 5.365,1.167 6.615,1.833 1.25,0.667 10 false Pressure Reduction Mode 0.708,2.656 1.792,3.073 1.083,0.417 10 false Hydraulic Circuit 2.167,2.167 2.75,3.5 0.583,1.333 10 false Pressure Holding Solenoid Valve 2.156,3.063 2.823,4.396 0.667,1.333 10 false Pressure Reduction Solenoid Valve 3,3.667 3.667,4.333 0.667,0.667 10 false to Wheel Cylinder 2.167,1.833 2.667,2.25 0.5,0.417 10 false Port A 2.167,3.833 2.667,4.25 0.5,0.417 10 false Port B 5.188,2.708 5.938,3.375 0.75,0.667 10 false to Reservoir and Pump 6,3.635 6.75,4.302 0.75,0.667 10 false from Wheel Cylinder 0.667,4.25 1.75,4.917 1.083,0.667 10 false Pressure Holding Valve 0.583,5.083 1.833,5.75 1.25,0.667 10 false Pressure Reduction Valve 0.917,6 1.583,6.5 0.667,0.5 10 false Pressure 2.552,4.333 3.219,4.833 0.667,0.5 10 false Off/Open 4.104,4.333 4.854,4.833 0.75,0.5 10 false On/Closed 5.646,4.333 6.396,4.833 0.75,0.5 10 false On/Closed 2.5,5.167 3.25,5.667 0.75,0.5 10 false Off/Closed 4.135,5.167 4.885,5.667 0.75,0.5 10 false Off/Closed 5.792,5.167 6.542,5.667 0.75,0.5 10 false On/Open 2.604,6 3.354,6.5 0.75,0.5 10 false Increase 4.333,6 5.083,6.5 0.75,0.5 10 false Hold 5.771,6 6.521,6.5 0.75,0.5 10 false Reduce



b.

Power Assist Brake (PAB) Operation

i.

In certain situations when the vacuum pressure of the vacuum booster calculated using the vacuum sensor and master cylinder pressure sensor is low, the skid control ECU may provide brake assist. Or in the event of a brake booster failure, based on the brake pedal load sensing switch and master cylinder pressure sensor signal, the skid control ECU may provide brake assist.


ii.

If the skid control ECU judges the need for additional brake assist, pressure is generated by the pump in the brake actuator and directed to the wheel cylinder to apply a large amount of fluid pressure.

Power Assist Brake (PAB) Circuit
X141241C01
3.094,4.323 3.583,3.979 3.583,3.979 4.125,4.313 true 3.188,5.771 3.573,5.542 3.573,5.542 3.99,5.781 true 3.167,6.385 3.594,6.635 3.594,6.635 4.021,6.385 true 1.177,2.521 0.573,2.281 true 6.521,2.219 6.01,2.51 true 1.417,4 1.26,3.521 true 2.323,4.01 2.542,3.229 true 4.844,4.01 4.521,3.229 true 5.76,4.01 5.875,3.531 true 1.427,5.177 0.583,5.552 true 2.323,5.177 1.833,6.156 true 4.844,5.198 5.25,6.156 true 5.75,5.167 6.542,5.5 true 2.792,0.292 3.135,0.542 0.344,0.25 10 false *1 0.531,1.375 0.875,1.625 0.344,0.25 10 false *2 1.688,1.625 2.031,1.875 0.344,0.25 10 false *3 3.5,3.813 3.844,4.063 0.344,0.25 10 false *4 3.5,5.375 3.844,5.625 0.344,0.25 10 false *5 3.521,6.646 3.865,6.896 0.344,0.25 10 false *6 0.865,7.458 1.208,7.708 0.344,0.25 10 false *7 2.719,7.458 3.063,7.708 0.344,0.25 10 false *8 4.313,7.458 4.667,7.708 0.354,0.25 10 false *9 6.104,7.458 6.458,7.708 0.354,0.25 10 false *10 1.135,3.104 1.479,3.354 0.344,0.25 10 false (1) 5.938,3.104 6.281,3.354 0.344,0.25 10 false (2) 1.365,4.594 1.708,4.844 0.344,0.25 10 false (3) 4.802,4.583 5.146,4.833 0.344,0.25 10 false (5) 2.271,4.594 2.615,4.844 0.344,0.25 10 false (4) 5.698,4.594 6.042,4.844 0.344,0.25 10 false (6) 1.354,5.74 1.698,5.99 0.344,0.25 10 false (7) 2.271,5.74 2.615,5.99 0.344,0.25 10 false (8) 4.792,5.729 5.135,5.979 0.344,0.25 10 false (9) 5.698,5.74 6.042,5.99 0.344,0.25 10 false (10) 0.052,2.188 0.646,2.573 0.594,0.385 10 false Port (A) 6.552,2.146 7.073,2.542 0.521,0.396 10 false Port (B) 0.99,3.354 1.51,3.75 0.521,0.396 10 false Port (C) 2.292,3.042 2.813,3.438 0.521,0.396 10 false Port (D) 4.229,3.031 4.75,3.427 0.521,0.396 10 false Port (E) 5.688,3.354 6.208,3.75 0.521,0.396 10 false Port (F) 0.083,5.479 0.604,5.875 0.521,0.396 10 false Port (G) 1.552,6.177 2.073,6.573 0.521,0.396 10 false Port (H) 5.01,6.177 5.531,6.573 0.521,0.396 10 false Port (I) 6.583,5.448 7.104,5.844 0.521,0.396 10 false Port (J)
*1 Brake Master Cylinder Sub-assembly *2 Brake Actuator Assembly
*3 Master Cylinder Pressure Sensor *4 Pump
*5 Pressure Regulator Valves *6 Reservoirs
*7 Rear Left Wheel Cylinder *8 Rear Right Wheel Cylinder
*9 Front Left Wheel Cylinder *10 Front Right Wheel Cylinder


Power Assist Brake (PAB) Control
Item Power Assist Brake (PAB) Not Activated Power Assist Brake (PAB) Activated

*: The solenoid valves control the hydraulic pressure by adjusting continually between "open" and "closed" according to the operating conditions.

(1), (2) Master Cylinder Cut Solenoid Valve OFF/Open ON*
Port: (A), (B)
(3), (4), (5), (6) Pressure Holding Solenoid Valve OFF/Open OFF/Open
Port: (C), (D), (E), (F)
(7), (8), (9), (10) Pressure Reduction Solenoid Valve OFF/Closed OFF/Open
Port: (G), (H), (I), (J)



c.

TRC Operation

i.

The fluid pressure generated by the pump is regulated by the master cylinder cut solenoid valve to achieve the required pressure. Thus, the brakes for the drive wheels are controlled in the following 3 modes: pressure reduction, pressure holding, and pressure increase modes, to control slippage of the drive wheels.


ii.

The diagram below shows the hydraulic circuit in the pressure increase mode when the TRC system is activated. The pressure holding solenoid valve and the pressure reduction solenoid valve are turned ON/OFF according to the ABS and EBD operation pattern.

Pressure Increase Mode
X141242C01
3.094,4.323 3.583,3.979 3.583,3.979 4.125,4.313 true 3.188,5.771 3.573,5.542 3.573,5.542 3.99,5.781 true 3.167,6.385 3.594,6.635 3.594,6.635 4.021,6.385 true 1.177,2.521 0.573,2.281 true 6.521,2.219 6.01,2.51 true 1.417,4 1.26,3.521 true 2.323,4.01 2.542,3.229 true 4.844,4.01 4.521,3.229 true 5.76,4.01 5.875,3.531 true 1.427,5.177 0.583,5.552 true 2.323,5.177 1.833,6.156 true 4.844,5.198 5.25,6.156 true 5.75,5.167 6.542,5.5 true 2.792,0.292 3.135,0.542 0.344,0.25 10 false *1 0.531,1.375 0.875,1.625 0.344,0.25 10 false *2 1.688,1.625 2.031,1.875 0.344,0.25 10 false *3 3.5,3.813 3.844,4.063 0.344,0.25 10 false *4 3.5,5.375 3.844,5.625 0.344,0.25 10 false *5 3.521,6.646 3.865,6.896 0.344,0.25 10 false *6 0.865,7.458 1.208,7.708 0.344,0.25 10 false *7 2.719,7.458 3.063,7.708 0.344,0.25 10 false *8 4.313,7.458 4.667,7.708 0.354,0.25 10 false *9 6.104,7.458 6.458,7.708 0.354,0.25 10 false *10 1.135,3.104 1.479,3.354 0.344,0.25 10 false (1) 5.938,3.104 6.281,3.354 0.344,0.25 10 false (2) 1.365,4.594 1.708,4.844 0.344,0.25 10 false (3) 4.802,4.583 5.146,4.833 0.344,0.25 10 false (5) 2.271,4.594 2.615,4.844 0.344,0.25 10 false (4) 5.698,4.594 6.042,4.844 0.344,0.25 10 false (6) 1.354,5.74 1.698,5.99 0.344,0.25 10 false (7) 2.271,5.74 2.615,5.99 0.344,0.25 10 false (8) 4.792,5.729 5.135,5.979 0.344,0.25 10 false (9) 5.698,5.74 6.042,5.99 0.344,0.25 10 false (10) 0.052,2.188 0.646,2.573 0.594,0.385 10 false Port (A) 6.552,2.146 7.073,2.542 0.521,0.396 10 false Port (B) 0.99,3.354 1.51,3.75 0.521,0.396 10 false Port (C) 2.292,3.042 2.813,3.438 0.521,0.396 10 false Port (D) 4.229,3.031 4.75,3.427 0.521,0.396 10 false Port (E) 5.688,3.354 6.208,3.75 0.521,0.396 10 false Port (F) 0.083,5.479 0.604,5.875 0.521,0.396 10 false Port (G) 1.552,6.177 2.073,6.573 0.521,0.396 10 false Port (H) 5.01,6.177 5.531,6.573 0.521,0.396 10 false Port (I) 6.583,5.448 7.104,5.844 0.521,0.396 10 false Port (J)
*1 Brake Master Cylinder Sub-assembly *2 Brake Actuator Assembly
*3 Master Cylinder Pressure Sensor *4 Pump
*5 Pressure Regulator Valves *6 Reservoirs
*7 Rear Left Wheel Cylinder *8 Rear Right Wheel Cylinder
*9 Front Left Wheel Cylinder *10 Front Right Wheel Cylinder


Item TRC Not Activated TRC Activated
Pressure Increase Mode Pressure Holding Mode Pressure Reduction Mode

*: The solenoid valves control the hydraulic pressure by adjusting continually between "open" and "closed" according to the operating conditions.

(1) Master Cylinder Cut Solenoid Valve OFF/Open ON* ON* ON*
Port: (A)
(2) Master Cylinder Cut Solenoid Valve OFF/Open ON* ON* ON*
Port: (B)
Front Brake (5), (6) Pressure Holding Valve OFF/Open ON/Closed ON/Closed ON/Closed
Port: (E), (F)
(9), (10) Pressure Reduction Valve OFF/Closed OFF/Closed OFF/Closed OFF/Closed
Port: (I), (J)
Wheel Cylinder Pressure - - - -
Rear Brake (3), (4) Pressure Holding Valve OFF/Open OFF/Open ON/Closed ON/Closed
Port: (C), (D)
(7), (8) Pressure Reduction Valve OFF/Closed OFF/Closed OFF/Closed ON/Open
Port: (G), (H)
Wheel Cylinder Pressure - Increase Holding Reduce



d.

VSC Operation

i.

The VSC system, by way of solenoid valves, controls the fluid pressure that is generated by the pump and applies it to the brake wheel cylinder of each wheel in the following 3 modes: pressure reduction, pressure holding, and pressure increase modes. As a result, the tendency of the vehicle to experience a front wheel skid or rear wheel skid is controlled.

1.

Front Wheel Skid Restraining Control (Right Turn)

-

For front wheel skid restraining control, the brakes of the front wheel of the outer side of the turn and the rear wheels are applied. Also, depending on whether the brake is ON or OFF and the condition of the vehicle, there are circumstances in which the brake might not be applied to the wheels even if those wheels are targeted for braking. The diagram below shows the hydraulic circuit in the pressure increase mode, as it controls the front wheel skid condition while the vehicle makes a right turn. In other operating modes, the pressure holding valve and the pressure reduction valve are turned ON/OFF according to the ABS with EBD operation pattern.

Pressure Increase Mode
X141243C01
3.094,4.323 3.583,3.979 3.583,3.979 4.125,4.313 true 3.188,5.771 3.573,5.542 3.573,5.542 3.99,5.781 true 3.167,6.385 3.594,6.635 3.594,6.635 4.021,6.385 true 1.177,2.521 0.573,2.281 true 6.521,2.219 6.01,2.51 true 1.417,4 1.26,3.521 true 2.323,4.01 2.542,3.229 true 4.844,4.01 4.521,3.229 true 5.76,4.01 5.875,3.531 true 1.427,5.177 0.583,5.552 true 2.323,5.177 1.833,6.156 true 4.844,5.198 5.25,6.156 true 5.75,5.167 6.542,5.5 true 2.792,0.292 3.135,0.542 0.344,0.25 10 false *1 0.531,1.375 0.875,1.625 0.344,0.25 10 false *2 1.688,1.625 2.031,1.875 0.344,0.25 10 false *3 3.5,3.813 3.844,4.063 0.344,0.25 10 false *4 3.5,5.375 3.844,5.625 0.344,0.25 10 false *5 3.521,6.646 3.865,6.896 0.344,0.25 10 false *6 0.865,7.458 1.208,7.708 0.344,0.25 10 false *7 2.719,7.458 3.063,7.708 0.344,0.25 10 false *8 4.313,7.458 4.667,7.708 0.354,0.25 10 false *9 6.104,7.458 6.458,7.708 0.354,0.25 10 false *10 1.135,3.104 1.479,3.354 0.344,0.25 10 false (1) 5.938,3.104 6.281,3.354 0.344,0.25 10 false (2) 1.365,4.594 1.708,4.844 0.344,0.25 10 false (3) 4.802,4.583 5.146,4.833 0.344,0.25 10 false (5) 2.271,4.594 2.615,4.844 0.344,0.25 10 false (4) 5.698,4.594 6.042,4.844 0.344,0.25 10 false (6) 1.354,5.74 1.698,5.99 0.344,0.25 10 false (7) 2.271,5.74 2.615,5.99 0.344,0.25 10 false (8) 4.792,5.729 5.135,5.979 0.344,0.25 10 false (9) 5.698,5.74 6.042,5.99 0.344,0.25 10 false (10) 0.052,2.188 0.646,2.573 0.594,0.385 10 false Port (A) 6.552,2.146 7.073,2.542 0.521,0.396 10 false Port (B) 0.99,3.354 1.51,3.75 0.521,0.396 10 false Port (C) 2.292,3.042 2.813,3.438 0.521,0.396 10 false Port (D) 4.229,3.031 4.75,3.427 0.521,0.396 10 false Port (E) 5.688,3.354 6.208,3.75 0.521,0.396 10 false Port (F) 0.083,5.479 0.604,5.875 0.521,0.396 10 false Port (G) 1.552,6.177 2.073,6.573 0.521,0.396 10 false Port (H) 5.01,6.177 5.531,6.573 0.521,0.396 10 false Port (I) 6.583,5.448 7.104,5.844 0.521,0.396 10 false Port (J)
*1 Brake Master Cylinder Sub-assembly *2 Brake Actuator Assembly
*3 Master Cylinder Pressure Sensor *4 Pump
*5 Pressure Regulator Valves *6 Reservoirs
*7 Rear Left Wheel Cylinder *8 Rear Right Wheel Cylinder
*9 Front Left Wheel Cylinder *10 Front Right Wheel Cylinder


Item VSC Not Activated VSC Activated
Pressure Increase Mode Pressure Holding Mode Pressure Reduction Mode

*: The solenoid valves control the hydraulic pressure by adjusting continually between "open" and "closed" according to the operating conditions.

(1), (2) Master Cylinder Cut Solenoid Valve OFF/Open ON* ON* ON*
Port: (A), (B)
Front Brake (5) Pressure Holding Valve OFF/Open OFF/Open ON/Closed ON/Closed
Port: (E)
(6) Pressure Holding Valve OFF/Open ON/Closed ON/Closed ON/Closed
Port: (F)
(9) Pressure Reduction Valve OFF/Closed OFF/Closed OFF/Closed ON/Open
Port: (I)
(10) Pressure Reduction Valve OFF/Closed OFF/Closed OFF/Closed OFF/Closed
Port: (J)
Wheel Cylinder Pressure Right - - - -
Left - Increase Holding Reduce
Rear Brake (3) Pressure Holding Valve OFF/Open OFF/Open ON/Closed ON/Closed
Port: (C)
(4) Pressure Holding Valve OFF/Open OFF/Open ON/Closed ON/Closed
Port: (D)
(7) Pressure Reduction Valve OFF/Closed OFF/Closed OFF/Closed ON/Open
Port: (G)
(8) Pressure Reduction Valve OFF/Closed OFF/Closed OFF/Closed ON/Open
Port: (H)
Wheel Cylinder Pressure Right - Increase Holding Reduce
Left - Increase Holding Reduce


2.

Rear Wheel Skid Restraining Control (Right Turn)

-

For rear wheel skid restraining control, the brake of the front and rear wheels of the outer side of the turn are applied. Also, depending on whether the brake is ON or OFF and the condition of the vehicle, there are circumstances in which the brake might not be applied to the wheels even if those wheels are targeted for braking. The diagram below shows the hydraulic circuit in the pressure increase mode, as it controls the rear wheel skid condition while the vehicle makes a right turn. In other operating modes, the pressure holding valve and the pressure reduction valve are turned ON/OFF according to the ABS with EBD operation pattern.

Pressure Increase Mode
X141244C01
3.094,4.323 3.583,3.979 3.583,3.979 4.125,4.313 true 3.188,5.771 3.573,5.542 3.573,5.542 3.99,5.781 true 3.167,6.385 3.594,6.635 3.594,6.635 4.021,6.385 true 1.177,2.521 0.573,2.281 true 6.521,2.219 6.01,2.51 true 1.417,4 1.26,3.521 true 2.323,4.01 2.542,3.229 true 4.844,4.01 4.521,3.229 true 5.76,4.01 5.875,3.531 true 1.427,5.177 0.583,5.552 true 2.323,5.177 1.833,6.156 true 4.844,5.198 5.25,6.156 true 5.75,5.167 6.542,5.5 true 2.792,0.292 3.135,0.542 0.344,0.25 10 false *1 0.531,1.375 0.875,1.625 0.344,0.25 10 false *2 1.688,1.625 2.031,1.875 0.344,0.25 10 false *3 3.5,3.813 3.844,4.063 0.344,0.25 10 false *4 3.5,5.375 3.844,5.625 0.344,0.25 10 false *5 3.521,6.646 3.865,6.896 0.344,0.25 10 false *6 0.865,7.458 1.208,7.708 0.344,0.25 10 false *7 2.719,7.458 3.063,7.708 0.344,0.25 10 false *8 4.313,7.458 4.667,7.708 0.354,0.25 10 false *9 6.104,7.458 6.458,7.708 0.354,0.25 10 false *10 1.135,3.104 1.479,3.354 0.344,0.25 10 false (1) 5.938,3.104 6.281,3.354 0.344,0.25 10 false (2) 1.365,4.594 1.708,4.844 0.344,0.25 10 false (3) 4.802,4.583 5.146,4.833 0.344,0.25 10 false (5) 2.271,4.594 2.615,4.844 0.344,0.25 10 false (4) 5.698,4.594 6.042,4.844 0.344,0.25 10 false (6) 1.354,5.74 1.698,5.99 0.344,0.25 10 false (7) 2.271,5.74 2.615,5.99 0.344,0.25 10 false (8) 4.792,5.729 5.135,5.979 0.344,0.25 10 false (9) 5.698,5.74 6.042,5.99 0.344,0.25 10 false (10) 0.052,2.188 0.646,2.573 0.594,0.385 10 false Port (A) 6.552,2.146 7.073,2.542 0.521,0.396 10 false Port (B) 0.99,3.354 1.51,3.75 0.521,0.396 10 false Port (C) 2.292,3.042 2.813,3.438 0.521,0.396 10 false Port (D) 4.229,3.031 4.75,3.427 0.521,0.396 10 false Port (E) 5.688,3.354 6.208,3.75 0.521,0.396 10 false Port (F) 0.083,5.479 0.604,5.875 0.521,0.396 10 false Port (G) 1.552,6.177 2.073,6.573 0.521,0.396 10 false Port (H) 5.01,6.177 5.531,6.573 0.521,0.396 10 false Port (I) 6.583,5.448 7.104,5.844 0.521,0.396 10 false Port (J)
*1 Brake Master Cylinder Sub-assembly *2 Brake Actuator Assembly
*3 Master Cylinder Pressure Sensor *4 Pump
*5 Pressure Regulator Valves *6 Reservoirs
*7 Rear Left Wheel Cylinder *8 Rear Right Wheel Cylinder
*9 Front Left Wheel Cylinder *10 Front Right Wheel Cylinder


Item VSC Not Activated VSC Activated
Pressure Increase Mode Pressure Holding Mode Pressure Reduction Mode

*: The solenoid valves control the hydraulic pressure by adjusting continually between "open" and "closed" according to the operating conditions.

(1), (2) Master Cylinder Cut Solenoid Valve OFF/Open ON* ON* ON*
Port: (A), (B)
Front Brake (5) Pressure Holding Valve OFF/Open OFF/Open ON/Closed ON/Closed
Port: (E)
(6) Pressure Holding Valve OFF/Open ON/Closed ON/Closed ON/Closed
Port: (F)
(9) Pressure Reduction Valve OFF/Closed OFF/Closed OFF/Closed ON/Open
Port: (I)
(10) Pressure Reduction Valve OFF/Closed OFF/Closed OFF/Closed OFF/Closed
Port: (J)
Wheel Cylinder Pressure Right - - - -
Left - Increase Holding Reduce
Rear Brake (3) Pressure Holding Valve OFF/Open OFF/Open ON/Closed ON/Closed
Port: (C)
(4) Pressure Holding Valve OFF/Open ON/Closed ON/Closed ON/Closed
Port: (D)
(7) Pressure Reduction Valve OFF/Closed OFF/Closed OFF/Closed ON/Open
Port: (G)
(8) Pressure Reduction Valve OFF/Closed OFF/Closed OFF/Closed OFF/Closed
Port: (H)
Wheel Cylinder Pressure Right - - - -
Left - Increase Holding Reduce





e.

Hill-start Assist Operation

i.

Hill-start assist control operation are performed by closing the master cylinder cut solenoid valves after the driver operates the brake pedal and leaving a certain amount of hydraulic pressure in the wheel cylinder. The diagram below shows the hydraulic circuit in the pressure holding mode.

Example of Hill-start Assist Control when Climbing Uphill with Shift Lever in a Position Other than R (Driver Depresses Accelerator Pedal to Start Off after Hill-start Assist Control Operation)
X141245E01
1.917,0.75 2.167,0.25 2.167,0.25 2.5,0.25 false 2.042,2.021 2.25,1.25 2.25,1.25 2.5,1.25 false 2.563,0.177 3.51,0.583 0.948,0.406 10 false Vehicle Stops 0.917,0.208 1.865,0.521 0.948,0.313 10 false Forward 0.802,1.042 1.75,1.354 0.948,0.313 10 false Backward 0.469,0.646 1.417,0.958 0.948,0.313 10 false Vehicle Speed 5.198,0.771 5.615,1.052 0.417,0.281 10 false Time 5.25,2.521 5.667,2.802 0.417,0.281 10 false Time 0.469,1.948 1.417,2.26 0.948,0.313 10 false Fluid Pressure 2.542,1.167 4.177,1.823 1.635,0.656 10 false Fluid pressure required to stop the vehicle 4.75,1.208 6.938,1.51 2.188,0.302 10 false : Fluid Pressure 4.75,1.469 6.938,1.771 2.188,0.302 10 false : Brake Pedal Operation 2.323,2.708 4.51,3.01 2.188,0.302 10 false Accelerator pedal is depressed 2.208,3.188 4.385,3.552 2.177,0.365 10 false Hill-start Assist Control Operation

Example of Hill-start Assist Control when Climbing Uphill with Shift Lever in a Position Other than R (Driver Takes No Action after Hill-start Assist Control Operation)
X141246E01
1.917,0.75 2.167,0.25 2.167,0.25 2.5,0.25 false 2.042,2.021 2.25,1.25 2.25,1.25 2.5,1.25 false 2.563,0.177 3.51,0.583 0.948,0.406 10 false Vehicle Stops 0.885,0.208 1.833,0.521 0.948,0.313 10 false Forward 0.781,1.042 1.729,1.354 0.948,0.313 10 false Backward 0.469,0.646 1.417,0.958 0.948,0.313 10 false Vehicle Speed 5.198,0.771 5.615,1.052 0.417,0.281 10 false Time 5.25,2.521 5.667,2.802 0.417,0.281 10 false Time 0.469,1.948 1.417,2.26 0.948,0.313 10 false Fluid Pressure 2.542,1.167 4.177,1.823 1.635,0.656 10 false Fluid pressure required to stop the vehicle 4.604,1.208 6.792,1.51 2.188,0.302 10 false : Fluid Pressure 4.615,1.469 6.802,1.771 2.188,0.302 10 false : Brake Pedal Operation 3.479,2.635 4.573,3.01 1.094,0.375 10 false Maximum 2 sec. 2.563,3.219 4.74,3.583 2.177,0.365 10 false Hill-start Assist Control Operation

Pressure Holding Mode
X141248C01
3.094,4.323 3.583,3.979 3.583,3.979 4.125,4.313 true 3.188,5.771 3.573,5.542 3.573,5.542 3.99,5.781 true 3.167,6.385 3.594,6.635 3.594,6.635 4.021,6.385 true 1.177,2.521 0.573,2.281 true 6.521,2.219 6.01,2.51 true 1.417,4 1.26,3.521 true 2.323,4.01 2.542,3.229 true 4.844,4.01 4.521,3.229 true 5.76,4.01 5.875,3.531 true 1.427,5.177 0.583,5.552 true 2.323,5.177 1.833,6.156 true 4.844,5.198 5.25,6.156 true 5.75,5.167 6.542,5.5 true 2.792,0.292 3.135,0.542 0.344,0.25 10 false *1 0.531,1.375 0.875,1.625 0.344,0.25 10 false *2 1.688,1.625 2.031,1.875 0.344,0.25 10 false *3 3.5,3.813 3.844,4.063 0.344,0.25 10 false *4 3.5,5.375 3.844,5.625 0.344,0.25 10 false *5 3.521,6.646 3.865,6.896 0.344,0.25 10 false *6 0.865,7.458 1.208,7.708 0.344,0.25 10 false *7 2.719,7.458 3.063,7.708 0.344,0.25 10 false *8 4.313,7.458 4.667,7.708 0.354,0.25 10 false *9 6.104,7.458 6.458,7.708 0.354,0.25 10 false *10 1.135,3.104 1.479,3.354 0.344,0.25 10 false (1) 5.938,3.104 6.281,3.354 0.344,0.25 10 false (2) 1.365,4.594 1.708,4.844 0.344,0.25 10 false (3) 4.802,4.583 5.146,4.833 0.344,0.25 10 false (5) 2.271,4.594 2.615,4.844 0.344,0.25 10 false (4) 5.698,4.594 6.042,4.844 0.344,0.25 10 false (6) 1.354,5.74 1.698,5.99 0.344,0.25 10 false (7) 2.271,5.74 2.615,5.99 0.344,0.25 10 false (8) 4.792,5.729 5.135,5.979 0.344,0.25 10 false (9) 5.698,5.74 6.042,5.99 0.344,0.25 10 false (10) 0.052,2.188 0.646,2.573 0.594,0.385 10 false Port (A) 6.552,2.146 7.073,2.542 0.521,0.396 10 false Port (B) 0.99,3.354 1.51,3.75 0.521,0.396 10 false Port (C) 2.292,3.042 2.813,3.438 0.521,0.396 10 false Port (D) 4.229,3.031 4.75,3.427 0.521,0.396 10 false Port (E) 5.688,3.354 6.208,3.75 0.521,0.396 10 false Port (F) 0.083,5.479 0.604,5.875 0.521,0.396 10 false Port (G) 1.552,6.177 2.073,6.573 0.521,0.396 10 false Port (H) 5.01,6.177 5.531,6.573 0.521,0.396 10 false Port (I) 6.583,5.448 7.104,5.844 0.521,0.396 10 false Port (J)
*1 Brake Master Cylinder Sub-assembly *2 Brake Actuator Assembly
*3 Master Cylinder Pressure Sensor *4 Pump
*5 Pressure Regulator Valves *6 Reservoirs
*7 Rear Left Wheel Cylinder *8 Rear Right Wheel Cylinder
*9 Front Left Wheel Cylinder *10 Front Right Wheel Cylinder


Item Hill-start Assist Control Operation
Not Activated Pressure Holding Mode Pressure Reduction Mode
(1), (2) Master Cylinder Cut Solenoid Valve OFF/Open ON/Closed OFF/Open
Port: (A), (B)
Front Brake (5) Pressure Holding Valve OFF/Open OFF/Open OFF/Open
Port: (E)
(6) Pressure Holding Valve OFF/Open OFF/Open OFF/Open
Port: (F)
(9) Pressure Reduction Valve OFF/Closed OFF/Closed OFF/Closed
Port: (I)
(10) Pressure Reduction Valve OFF/Closed OFF/Closed OFF/Closed
Port: (J)
Wheel Cylinder Pressure Right - Holding Reduce
Left - Holding Reduce
Rear Brake (3) Pressure Holding Valve OFF/Open OFF/Open OFF/Open
Port: (C)
(4) Pressure Holding Valve OFF/Open OFF/Open OFF/Open
Port: (D)
(7) Pressure Reduction Valve OFF/Closed OFF/Closed OFF/Closed
Port: (G)
(8) Pressure Reduction Valve OFF/Closed OFF/Closed OFF/Closed
Port: (H)
Wheel Cylinder Pressure Right - Holding Reduce
Left - Holding Reduce



f.

Initial Check

i.

After the ignition switch is turned ON (IG), and the vehicle attains an approximate speed of 6 km/h (4 mph) or more, the skid control ECU performs the initial check.


ii.

The functions of each solenoid valve and pump motor in the brake actuator assembly are checked in order.