Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › BRAKE CONTROL SYSTEM(w/ VSC) › from 2018.07
NM2850E _54 Brake _073399 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0363235 BRAKE CONTROL SYSTEM(w/ VSC) CO CONTROL F

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  BRAKE CONTROL SYSTEM(w/ VSC)  CONTROL  BRAKE ASSIST  


SYSTEM CONTROL


a.

During brake assist, the skid control ECU calculates the speed and the amount of brake pedal application based on signals from the master cylinder pressure sensor and then determines the intention of the driver to make an emergency brake application. If the skid control ECU determines that the driver intends to make an emergency brake application, this function activates the brake actuator to increase the brake fluid pressure, which increases the brake force.

X105302E02
0.865,2.917 3.656,3.26 2.792,0.344 10 false Fluid Pressure Increased by Brake Actuator 0.99,0.542 2.188,0.865 1.198,0.323 10 false Skid Control ECU 1.073,1.333 2.167,1.646 1.094,0.313 10 false Brake Actuator 4.948,2.177 6.344,2.521 1.396,0.344 10 false Without Brake Assist 5.073,1.458 6.302,1.802 1.229,0.344 10 false With Brake Assist 5.5,2.781 5.906,3.125 0.406,0.344 10 false Time 4.083,0.833 4.479,1.49 0.396,0.656 10 false Brake Force