Home › Suspension › FRONT SUSPENSION › FRONT SUSPENSION SYSTEM
NM2850E _53 Suspension _073396 FRONT SUSPENSION _0357374 FRONT SUSPENSION SYSTEM DE DETAILS F

FRONT SUSPENSION  FRONT SUSPENSION SYSTEM  DETAILS  TORSION BAR SPRING  


CONSTRUCTION


a.

Connected at the front to the torque arm attached to the upper suspension arm, and joined at the rear to the anchor arm through a serration fitting, the torsion bar spring is mounted onto the cross member by an adjusting bolt via the anchor arm. Therefore, the vehicle height can be adjusted by turning the adjust bolt. The rear of the torsion bar springs are stamped "R" for the right, and "L" for the left side. A boot to protect the tapered ends is provided at the rear serration fitting area.

X140871E01
1.823,1.99 3.51,2.188 1.688,0.198 10 false Adjusting Nut 2.271,1.594 3.958,1.792 1.688,0.198 10 false Swivel 3.24,0.771 4.927,0.969 1.688,0.198 10 false Anchor Arm 4.229,1.927 5.031,2.167 0.802,0.24 10 false Boot 4,2.198 4.771,2.708 0.771,0.51 10 false Torsion Bar Spring 3.5,2.792 5.188,2.99 1.688,0.198 10 false Torque Arm 5,2.021 5.521,2.208 0.521,0.188 10 false Right 5.646,2.021 6.104,2.229 0.458,0.208 10 false Left 1.688,3.896 2.521,4.156 0.833,0.26 10 false Upper Arm