Home › General › INTRODUCTION › FEATURES › 2017.01–2018.07
NM2850E _V1 General _074964 INTRODUCTION _0363765 FEATURES GE GENERAL F

INTRODUCTION  FEATURES  GENERAL  PERFORMANCE  


OUTLINE


a.

14B Engine

i.

The 14B engine is an in-line 4-cylinder, 3.7-liter, 8-valve OHV diesel engine.

Engine Type 14B
Item No. of Cyls. and Arrangement 4-cylinder, In-line
Valve Mechanism 8-valve OHV, Gear Drive
Displacement 3661 cm3 (223.4 cu. in.)
Maximum Output [SAE-NET] 72 kw @ 3400 rpm
Maximum Torque [SAE-NET] 240 N*m @ 1800 rpm



b.

N04C-VL Engine

i.

The N04C-VL engine is an in-line 4-cylinder, 4.0-liter, 16-valve OHV diesel engine.


ii.

This engine uses the common-rail system and turbocharger with intercooler. It has been developed to realize high output, good fuel economy and clean exhaust emission.

Engine Type N04C-VL
Item No. of Cyls. and Arrangement 4-cylinder, In-line
Valve Mechanism 16-valve OHV, Gear Drive
Displacement 4009 cm3 (244.9 cu. in.)
Maximum Output [EEC] 100 kw @ 3000 rpm
Maximum Torque [EEC] 353 N*m @ 1600 rpm



c.

N04C-VQ Engine

i.

The N04C-VQ engine is an in-line 4-cylinder, 4.0-liter, 16-valve OHV diesel engine.


ii.

This engine uses the common-rail system, variable nozzle vane type turbocharger with intercooler and oxidation catalyst. It has been developed to realize high output, good fuel economy and clean exhaust emission.

Engine Type N04C-VQ
Item No. of Cyls. and Arrangement 4-cylinder, In-line
Valve Mechanism 16-valve OHV, Gear Drive
Displacement 4009 cm3 (244.9 cu. in.)
Maximum Output [EEC] 100 kw @ 2500 rpm
Maximum Torque [EEC] 390 N*m @ 1400 to 2400 rpm



d.

N04C-UH Engine

i.

The N04C-UH engine is an in-line 4-cylinder, 4.0-liter, 16-valve OHV diesel engine.


ii.

This engine uses the common-rail system, variable nozzle vane type turbocharger with intercooler and DPF (Diesel Particulate Filter) system. It has been developed to realize high output, good fuel economy and clean exhaust emission.

Engine Type N04C-UH
Item No. of Cyls. and Arrangement 4-cylinder, In-line
Valve Mechanism 16-valve OHV, Gear Drive
Displacement 4009 cm3 (244.9 cu. in.)
Maximum Output [EEC] 110 kw @ 2700 rpm
Maximum Torque [EEC] 397 N*m @ 1800 rpm



e.

1HZ Engine

i.

The 1HZ engine is an in-line 6-cylinder, 4.2-liter, 12-valve OHC diesel engine.

Engine Type 1HZ
Item No. of Cyls. and Arrangement 6-cylinder, In-line
Valve Mechanism 12-valve OHC, Gear and Belt Drive
Displacement 4164 cm3 (254.1 cu. in.)
Maximum Output [SAE-NET] 96 kw @ 3800 rpm
Maximum Torque [SAE-NET] 285 N*m @ 2200 rpm



f.

1BZ-FPE Engine

i.

The 1BZ-FPE engine is an in-line 4-cylinder, 4.1-liter, 16-valve OHV engine.


ii.

The fuel of this engine is LPG (Liquefied Petroleum Gas).

Engine Type 1BZ-FPE
Item No. of Cyls. and Arrangement 4-cylinder, In-line
Valve Mechanism 16-valve OHV, Gear Drive
Displacement 4104 cm3 (250.4 cu. in.)
Maximum Output [SAE-NET] 85 kw @ 3600 rpm
Maximum Torque [SAE-NET] 306 N*m @ 2000 rpm



g.

2TR-FE Engine

i.

The 2TR-FE engine is an in-line 4-cylinder, 2.7-liter, 16-valve DOHC engine.


ii.

This engine uses the DIS (Direct Ignition System), ECTS-i (Electronic Throttle Control System-intelligent) and VVT-i (Variable Valve Timing-intelligent). It has been developed to realize high performance, quietness, fuel economy and clean exhaust emission.

Engine Type 2TR-FE
Item No. of Cyls. and Arrangement 4-cylinder, In-line
Valve Mechanism 16-valve DOHC, Chain Drive (with VVT-i)
Displacement 2694 cm3 (164.4 cu. in.)
Maximum Output [SAE-NET] 108 kw @ 4800 rpm
Maximum Output [SAE-NET] 235 N*m @ 3800 rpm



h.

Manual Transmission

i.

M152, M155, M156 and M551 5-speed manual transmissions are used.



i.

Automatic Transmission

i.

A444E 4-speed automatic transmission is used.



j.

Suspension

i.

A torsion bar type double-wishbone independent suspension is used for the front.


ii.

A leaf spring type rigid axle suspension is used for the rear.



k.

Steering

i.

A recirculating ball type steering gear is used.


ii.

Hydraulic power steering is used.


iii.

A manual tilt and telescopic mechanism in the steering column is used for the some models.



l.

Brake

i.

2 type of front brake are available: A ventilated disk brake type or a 2-leading type drum brake.


ii.

Dual-2-leading type drum brake is used for the rear.


iii.

A brake control system equipped with an ABS (Anti-lock Brake System), PAB (Power Assist Brake)*1 and EBD (Electronic Brake force Distribution)*2 is used for the some models.

HINT:

*1: Power Assist Brake (brake pressure increase function)

*2: Models with CAN communication compatible skid control ECU (brake actuator assembly)