CONSTRUCTION
Driver's Seat
A seat back pocket has been provided on the driver seat of the models for G.C.C. countries, general countries, and Australia .
A slide mechanism and reclining mechanism have been employed to enable optimal seat position adjustment.
The vertically adjusting front seat headrest assembly has been provided.
The front seat under tray assembly has been provided under the seat to improve storage.
| *1 | Front Seat Headrest Assembly | *2 | Reclining Lever (Reclining Adjuster Release Handle LH) |
| *3 | Slide Lever (Outer Front Seat Track Assembly LH) | - | - |
| *a | The illustrations shown are examples only. | - | - |
The front seat under tray assembly is configured such that pulling the knob (seat under tray lock assembly) releases the lock and enables the tray to be pulled out. Also, the front seat under tray assembly can be used to store items such as maps or vehicle registration certificates.
| *1 | Front Seat Under Tray Assembly | *2 | Knob (Seat Under Tray Lock Assembly) |
| *a | Closed | *b | Opened |
| *c | The illustrations shown are examples only. | - | - |
Front Sub-seat
A front sub-seat has been adopted for the Jamaica package models .
Passenger's Seat
A new frame has been adopted for passenger seats, and the design of the seats has been updated .
Seat legs and reclining covers have been configured in a plane so that the areas around the seats are neat, providing wide passages and leg spaces .
A seat reclining function has been provided for all the rear passenger seats* of the Hong Kong package models .
*: Except the passenger seats for a single person at the second row and the passenger seats at the final row.
The seat's assist grip assembly provided for the models for Australia has been abolished .
Various types of seat backs have been employed for the passenger seats and provided according to specifications.
Folding seat backs have been employed for rear most seats and provided according to specifications.
| *a | The illustrations shown are examples only. | - | - |
The shoulder width of a seat back has been increased, presenting a class, modern appearance .
While taking into account the lines of flows in the passages, a space has been provided, allowing easy communication between the passengers at the front and rear seats .
The neutral angle of a seat back has been increased from 19° to 21 °
| *a | The illustrations shown are examples only. | - | - |
A design that carries over the image of high seat backs has been adopted .
| *a | The illustrations shown are examples only. | - | - |
A reasonable specification having a unified design of the model series has been adopted .
Seatback
A different hardness has been adopted on part of the seat back of the passenger seats of high seat back type. Also, a newly shaped lumber portion has been adopted, providing a further comfortable ride.
Seat Cushion
A newly designed seat cushioning pad has been adopted for the passenger seats of the models for G.C.C. countries, general countries, and Australia, providing a further comfortable ride.
Seat Cover
2-tone type seat covers have been adopted on the seat covers of the fabric for the models for Australia, Taiwan and the Hong Kong package models. Also, a new pattern has been adopted on the seat covers.
A new pattern has been adopted on the seat covers of the fabric for the models for G.C.C. countries and general countries.