Home › Vehicle Exterior › DOOR / HATCH › POWER SLIDE DOOR SYSTEM(for Glide Type) › from 2018.07
NM2850E _59 Vehicle Exterior _074161 DOOR / HATCH _0361249 POWER SLIDE DOOR SYSTEM(for Glide Type) DE DETAILS F

DOOR / HATCH  POWER SLIDE DOOR SYSTEM(for Glide Type)  DETAILS  ACCELERATOR INTERLOCK  


CONSTRUCTION


a.

An accelerator interlock sysytem is used to prevent the vehicle from being driven with its automatic door open.


b.

The accelerator interlock mechanism is provided a double link type for RHD models or a rod protruding type for LHD models.



OPERATION (Double Link Type)


a.

In double link type, the accelerator pedal is locked by a double link.

Y226614



OPERATION (Rod Protruding Type)


a.

In rod protruding type, the accelerator pedal is locked by a rod which protrudes against the underside of the accelerator pedal, and is freed when the rod recedes away from the pedal. The limit switches which are enclosed inside the switch cover control the rotation direction of the motor by mechanically turning themselves on or off dependent upon the rod protrusion or retraction.

Y226615

Wiring Diagram
Y226616


b.

When the center door is opened by the operation of the automatic door switch, the center door courtesy switch is turned on, and the No. 1 and No. 2 accelerator interlock relays switch to the A direction. At this time, the No. 1 limit switch of the accelerator interlock motor, which is engaged, allows current to flow from terminals 1, 2, 6, to 4. The accelerator interlock motor will then turn in the direction in which the rod protrudes (upward), causing the accelerator pedal to lock.


c.

When the center door is closed by the operation of the automatic door switch, the center door courtesy switch is turned off, and the No. 1 and No. 2 accelerator interlock relays switch to the B direction. At this time, the No. 2 limit switch of the accelerator interlock motor, which is engaged, allows current to flow from terminals 1, 5, 4, to 6. The accelerator interlock motor will then turn in the direction in which the rod retracts (downward), causing the accelerator pedal to be freed.

Y226617