OUTLINE
The engine control system of the N04C-UH engine consists of the following systems.
| System | Outline |
|---|---|
| Fuel Injection Volume Control | Controls the injection volume by calculating an optimal level in accordance with the conditions of the engine. |
| Pilot Injection Control | Pilot injection is a method that provides auxiliary fuel injection. |
| Fuel Injection Timing Control | Controls the injection timing by calculating the optimal fuel injection timing in accordance with the conditions of the engine. |
| Fuel Pressure Control | Controls the fuel pressure by sending signals to the suction control valve of the supply pump in accordance with the operating conditions of the engine. |
| Throttle Control | ·
Controls the extent of the opening of the throttle valve in accordance with the engine conditions. ·
Controls the intake throttle mechanism, which is provided upstream of the EGR valve, to a degree of opening that is suited to the driving conditions. |
| Idle Speed Control | Controls the idle speed by calculating the target speed in accordance with the conditions of the engine. |
| Idle Speed Fluctuation Stabilization Control | Detects the fluctuations in the engine speed for each cylinder and makes injection volume corrections. |
| Air Conditioning Cut-off Control | Cuts off the air conditioning during acceleration to ensure proper drivability. |
| EGR Control | Controls the volume of exhaust gas recirculation in accordance with the driving conditions. |
| Exhaust Retarder Control | ·
Closes the exhaust retarder valve in order to apply the engine brake. ·
Closes the exhaust retarder valve when the engine is idling for a long time, in order to reduce the HC in the DPF catalytic converter. |
| DPF Control | Based on the signals received from various sensors, the engine ECU controls the common-rail system in order to burn the PM that is captured in the filter with catalyst. |
| Diagnosis | If a malfunction occurs in the system, this function illuminates an indicator light to alert the driver. Also, it is possible to diagnose the area of the malfunction by shorting the terminals. |
| Fail Safe | If a failure occurs in the sensor signals, this function continues control through the use of the standard values stored in the engine ECU, or causes the engine to stop. |