CONSTRUCTION
General
The fuel filter consists of a fuel filter element integrated with the fuel filter housing.
A fuel filter with a built-in sedimenter is used.
A fuel sedimenter level warning switch, which detects when water, etc. has accumulated beyond a specific level, is provided in the sedimenter section. When the fuel sedimenter level warning switch turns ON, the warning indicator light of the combination meter illuminates to alert the driver.
A fuel filter warning switch is provided in the fuel filter.
A recirculation type fuel heater is used in cold area specification models. This limits the precipitation of the wax component of light oil fuel at low temperatures, thus inhibiting the clogging of the filter element.
| *A | Models with Standard | *B | Models with Cold Area |
| *1 | Priming Pump | *2 | Fuel Filter Warning Switch |
| *3 | Fuel Heater | *4 | Fuel Filter Assembly
·
Filter Element |
| *A | Models with Cold Area | - | - |
| *1 | Fuel Tank | *2 | Fuel Cooler |
| *3 | Fuel Filter | *4 | Fuel Heater |
| *5 | Filter Element | *6 | Fuel Sedimenter Level Warning Switch |
| *7 | Fuel Filter Warning Switch | *8 | Combination Meter |
| *9 | Engine | *10 | Supply Pump |
| *11 | Common-rail | *12 | Injectors |
Fuel Heater
General
A recirculation type fuel heater is used in cold area specification models. This heater heats the fuel by recirculating the return fuel, which that has reached a high temperature as a result of the pumping of the supply pump, to the fuel filter.
| *1 | Fuel Cooler | *2 | Fuel Tank |
| *3 | Fuel Filter | *4 | Recirculation Type Fuel Heater |
| *5 | Engine | *6 | Supply Pump |
| *7 | Common-rail | *8 | Injectors |
| *a | Feed | *b | Return |
Operation
While the engine is cold, the recirculation valve inside the fuel heater will be open due to the bimetal action, so the return fuel will return to the fuel filter and the fuel tank.
While the engine is warm, the recirculation valve will be closed due to the bimetal action, so all the return fuel will return to the fuel tank.
| *1 | Fuel Heater | - | - |
| *a | Cold Engine | *b | Warm Engine |
| *c | To Fuel Tank | *d | From Supply Pump |
| *e | To Fuel Filter | *f | Recirculation Valve (Bimetal) Open |
| *g | Recirculation Valve (Bimetal) Closed | - | - |
Fuel Filter Warning Switch
A fuel filter warning switch, which turns ON/OFF when the internal vacuum of the filter increases, is provided in the fuel filter. This switch, which turns OFF when the internal vacuum of the fuel filter increases to a predetermined level, is connected by a wire to the combination meter.
When the fuel filter warning switch detects that the internal vacuum of the fuel filter has increased (by way of the fuel filter warning switch OFF signal), it determines that the fuel filter has become clogged. Then, it illuminates the fuel system warning light on the combination meter to urge the driver to replace the fuel filter.
| *1 | Fuel System Warning Light | *2 | Combination Meter |
| *3 | Fuel Filter Warning Switch | *4 | Diaphragm |
| *5 | Filter Element | *6 | Fuel Filter |
| *a | Normal Fuel Filter | *b | Fuel Filter Clogged Up |
| *c | From Fuel Tank | *d | To Supply Pump |
| *e | Negative Pressure (Vacuum) | - | - |