FUNCTION
In the common-rail system, the pressurized fuel provided by the supply pump is stored in the common-rail and injected by the solenoid injectors.
The common-rail system stores the fuel, which has been pressurized by the pump, in the common-rail. Because the common-rail constantly accumulates a stable injection pressure without being affected by engine speed or load, this system is able to constantly provide a stable injection pressure, even when the engine is operating at low speeds.
The engine ECU transmits signals to the injector solenoid valves via the EDU (Electronic Driver Unit) in order to precisely control the fuel injection timing and injection volume.
| *1 | Engine ECU | *2 | Supply Pump |
| *3 | Fuel Temperature Sensor | *4 | SCV (Suction Control Valve) |
| *5 | Fuel Filter | *6 | Fuel Tank |
| *7 | Fuel Cooler | *8 | Common-rail |
| *9 | Fuel Pressure Sensor | *10 | Pressure Limiter |
| *11 | Injector | *12 | EDU |
| *13 | Fuel Temperature Sensor | *14 | Accelerator Pedal Position Sensor |
| *15 | Intake Air Temperature Sensor | *16 | Water Temperature Sensor |
| *17 | Crankshaft Position Sensor | *18 | Camshaft Position Sensor |
| *19 | Differential Pressure Sensor | *20 | Exhaust Gas Temperature Sensor |
| *21 | Air Flow Meter | *22 |