CONSTRUCTION
An intake manifold made of lightweight aluminum alloy is used. The shape of the ports has been optimized in order to ensure the proper intake air volume throughout all operating ranges, ensure better combustion efficiency, and minimize exhaust emissions.
The intake pipe is located in front of the intake manifold.
In the intake pipe, an EGR passage is provided between the EGR cooler and EGR valve, and between the EGR valve and the intake manifold
A pedestal for detecting the intake air temperature is provided on the intake manifold.
| *1 | Intake Manifold | *2 | Intake Pipe |
| *3 | EGR Valve | - | - |
| *a | Exhaust Gas (From EGR Cooler) | *b | Pedestal for Detecting Intake Air Temperature |