FUNCTION
In the common-rail system, the pressurized fuel provided by the injection or supply pump assembly is stored in the common-rail and injected by the solenoid injectors.
The common-rail system stores the fuel, which has been pressurized by the pump, in the common-rail assembly. Because the common-rail assembly constantly accumulates a stable injection pressure without being affected by engine speed or load, this system is able to constantly provide a stable injection pressure, even when the engine is operating at low speeds.
The ECM transmits signals to the injector solenoid valves via the EDU (Electronic Driver Unit) in order to precisely control the fuel injection timing and injection volume.
| *1 | ECM | *2 | Injection or Supply Pump |
| *3 | Fuel Temperature Sensor | *4 | SCV (Suction Control Valve) |
| *5 | Fuel Filter Assembly | *6 | Fuel Tank Assembly |
| *7 | Diesel Fuel Filter Assembly | *8 | Common-rail Assembly |
| *9 | Fuel Pressure Sensor | *10 | Pressure Limiter |
| *11 | Injector | *12 | EDU |
| *13 | Accelerator Pedal Position Sensor | *14 | Engine Coolant Temperature Sensor |
| *15 | Crankshaft Position Sensor | *16 | Camshaft Position Sensor |
| *17 | Intake Mass Air Flow Meter Sub-assembly (Intake Air Temperature Sensor) | - | - |