CONSTRUCTION
Because this system uses solenoid injectors in which solenoid valves open and close the fuel passages, the ECM can precisely control the fuel injection volume and injection timing. Thus, this system minimizes the generation of black smoke, which is peculiar to diesel engines.
Each injector assembly consists of a nozzle needle, piston, and solenoid valve.
An injector assembly compensation value and QR (Quick Response) code containing encoded characteristics of the injector assembly are printed on each injector assembly
The injector assembly compensation value and QR code contain various pieces of information regarding the injector assembly, such as model code and injection volume values.
| *1 | Nozzle Leakage Pipe Assembly | *2 | Injector Assembly |
| *3 | Holder | *4 | Solenoid Valve |
| *5 | Command Chamber | *6 | Valve Assembly |
| *7 | Piston | *8 | Nozzle Needle |
OPERATION
When electrical current is applied to the solenoid coil, it pulls the solenoid valve up.
The orifice of the control chamber opens, allowing the fuel to flow out.
The fuel pressure in the control chamber drops.
Simultaneously, fuel flows from the orifice to the bottom of the piston, which raises the piston.
As a result, the piston raises the nozzle needle to inject fuel.
| *1 | Solenoid Coil | *2 | Solenoid Valve |
| *3 | Piston Fuel | *4 | Nozzle Needle |
| *5 | Control Chamber | *6 | Fuel |