CONSTRUCTION
Ball joint is used to join the center exhaust pipe assembly and No. 2 center exhaust pipe assembly. As a result, a simple construction and reliability are realized.
An exhaust retarder assembly is used. The engine braking effect is boosted by closing a valve provided downstream of the turbocharger sub-assembly and narrowing the exhaust gas passage.
| *1 | Turbocharger Sub-assembly | *2 | Exhaust Retarder Assembly |
| *3 | Front Exhaust Pipe Assembly | *4 | No. 2 Front Exhaust Pipe Assembly |
| *5 | Center Exhaust Pipe Assembly | *6 | No. 2 Center Exhaust Pipe Assembly |
| *7 | Tail Exhaust Pipe Assembly | - | - |
| *a | Gasket | - | - |
|
Exhaust Gas | - | - |