CONSTRUCTION
A 16-valve OHV system is used. The camshaft drives the push rods, rocker arms, and valve bridges in order to open and close the valves.
Push rods made of highly rigid carbon steel are used to achieve a high speed threshold. The portion of the push rods that comes in contact with the rocker arms has been hardened to ensure proper wear resistance.
Intake and exhaust valves made of heat-resistant steel are used. The stems and the ends have been nitrocarburized to ensure proper wear resistance.
Cast iron valve lifters are used.
| *1 | No. 1 Rocker Arm Sub-assembly | *2 | No. 1 Valve Rocker Shaft Sub-assembly |
| *3 | Valve Push Rod | *4 | Valve Lifter |
| *5 | Camshaft | *6 | Intake Valve |
| *7 | Exhaust Valve | *8 | Inner Compression Spring |
| *9 | Valve Bridge | *10 | Valve Adjust Screw |
| *11 | No. 2 Valve Rocker Arm Sub-assembly | - | - |