CONSTRUCTION
General
The EFI fuel filter consists of a fuel filter element integrated with the fuel filter housing.
A fuel filter with a built-in sedimenter is used.
A fuel sedimenter level warning switch, which detects when water, etc. has accumulated beyond a specific level, is provided in the sedimenter section. When the fuel sedimenter level warning switch turns ON, the warning indicator light of the combination meter illuminates to alert the driver.
A fuel filter warning switch is provided in the fuel filter.
| *1 | Priming Pump | *2 | Fuel Filter Warning Switch |
| *3 | Fuel Filter Assembly
·
Filter Element |
- | - |
| *A | Models with Cold Area | - | - |
| *1 | Fuel Tank Assembly | *2 | Fuel Filter |
| *3 | Filter Element | *4 | Fuel Sedimenter Level Warning Switch |
| *5 | Fuel Filter Warning Switch | *6 | Combination Meter Assembly |
| *7 | Engine | *8 | Injection or Supply Pump |
| *9 | Common-rail Assembly | *10 | Injectors |
Fuel Filter Warning Switch
A fuel filter warning switch, which turns ON/OFF when the internal vacuum of the filter increases, is provided in the fuel filter. This switch, which turns OFF when the internal vacuum of the fuel filter increases to a predetermined level, is connected by a wire to the combination meter assembly.
When the fuel filter warning switch detects that the internal vacuum of the fuel filter has increased (by way of the fuel filter warning switch OFF signal), it determines that the fuel filter has become clogged. Then, it illuminates the fuel system warning light on the combination meter assembly to urge the driver to replace the fuel filter.
| *1 | Fuel System Warning Light | *2 | Combination Meter Assembly |
| *3 | Fuel Filter Warning Switch | *4 | Diaphragm |
| *5 | Filter Element | *6 | EFI Fuel Filter |
| *a | Normal Fuel Filter | *b | Fuel Filter Clogged Up |
| *c | From Fuel Tank | *d | To Injection or Supply Pump |
| *e | Negative Pressure (Vacuum) | - | - |