Home › Engine / Hybrid System › N04C-VL ENGINE CONTROL › ECD SYSTEM
NM2850E _51 Engine / Hybrid System _074222 N04C-VL ENGINE CONTROL _0361387 ECD SYSTEM GE GENERAL F

N04C-VL ENGINE CONTROL  ECD SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

The engine control system of the N04C-VL engine consists of the following systems.

System Outline

*: Models with Air Conditioner

Fuel Injection Volume Control Controls the injection volume by calculating an optimal level in accordance with the conditions of the engine.
Pilot Injection Control Pilot injection is a method that provides auxiliary fuel injection.
Fuel Injection Timing Control Controls the injection timing by calculating the optimal fuel injection timing in accordance with the conditions of the engine.
Fuel Pressure Control Controls the fuel pressure by sending signals to the suction control valve of the injection or supply pump assembly in accordance with the operating conditions of the engine.
Throttle Control Controls the extent of the opening of the throttle valve in accordance with the engine conditions.
Idle Speed Control Controls the idle speed by calculating the target speed in accordance with the conditions of the engine.
Idle Speed Fluctuation Stabilization Control Detects the fluctuations in the engine speed for each cylinder and makes injection volume corrections.
Air Conditioning Cut-off Control * Cuts off the air conditioning during acceleration to ensure proper drivability.
Exhaust Retarder Control Closes the exhaust retarder valve in order to apply the engine brake.
Diagnosis If a malfunction occurs in the system, this function illuminates an indicator light to alert the driver. Also, it is possible to diagnose the area of the malfunction by shorting the terminals.
Fail Safe If a failure occurs in the sensor signals, this function continues control through the use of the standard values stored in the ECM, or causes the engine to stop.