Home › Engine / Hybrid System › N04C-VL ENGINE CONTROL › ECD SYSTEM
NM2850E _51 Engine / Hybrid System _074222 N04C-VL ENGINE CONTROL _0361387 ECD SYSTEM CO CONTROL F

N04C-VL ENGINE CONTROL  ECD SYSTEM  CONTROL  ENGINE CONTROL  


FUNCTION OF MAIN COMPONENTS


a.

The main components of the engine control system are as follows:

Component Outline
Engine Coolant Temperature Sensor Detects the water temperature.
Fuel Pressure Sensor Detects the fuel pressure in the common-rail assembly.
Fuel Temperature Sensor Detects the fuel temperature in the injection or supply pump.
Crankshaft Position Sensor Detects the engine speed from the crankshaft position.
Camshaft Position Sensor Identifies the cylinder from the rotation of the rotor.
Intake Mass Air Flow Meter Sub-assembly (Atmospheric Temperature Sensor) Uses a hot wire to detect the intake air flow mass.
Starter Signal Detects the starter voltage signal at the time the engine is started.
Vehicle Speed Sensor Detects the vehicle speed.
Throttle Position Sensor Detects the opening angle of the throttle valve.
Accelerator Pedal Position Sensor Mounted on the accelerator pedal. Detects the position of the accelerator pedal.
Injector Precisely injects fuel.
Suction Control Valve Controls the volume of fuel to be supplied to the supply pump.
Exhaust Retarder Solenoid Opens and closes the exhaust retarder.
Throttle Control Motor Uses a step motor to restrict the intake passage.
EDU Controls the volume of fuel injected by the injectors.