FUNCTION
The ECM determines the target fuel pressure based on the load condition.
The ECM adjusts the SCV opening angle by the duty control function to reach the target fuel pressure.
| *1 | ECM | *2 | SCV |
| *3 | Plunger | *4 | Cam |
| *a | Duty Control | *b | Fuel (from Diesel Fuel Filter Assembly) |
| *c | Fuel (to Common-rail Assembly) | - | - |
OPERATION
Small Opening of Suction Control Valve
When the opening of the suction control valve is small, the fuel suction passage narrows and slows down the fuel flow.
Even if the plunger reaches its maximum stroke, the volume of fuel drawn in by the plunger becomes restricted because the fuel suction passage is restricted. (See "*b" in the diagram.)
The injection or supply pump assembly discharges fuel when the cam pushes the plunger upward and the fuel discharge pressure becomes higher than the fuel pressure in the common-rail assembly. (See "*c" in the diagram.)
| *1 | SCV | *2 | Plunger |
| *3 | Cam | - | - |
| *a | Plunger Top-Dead-Center | *b | Plunger Bottom-Dead-Center |
| *c | Compression Starting Point | *d | Plunger Stroke |
| *e | Fuel Suction Volume | - | - |
Large Opening of Suction Control Valve
When the opening of the suction control valve is large, the fuel suction passage widens and facilitates the fuel flow.
When the plunger reaches its maximum stroke, the plunger draws an ample volume of fuel because the fuel suction passage is not restricted. (See "*b" in the diagram.)
The injection or supply pump assembly discharges fuel when the cam pushes the plunger upward and the fuel discharge pressure becomes higher than the fuel pressure in the common-rail assembly. (See "*c" in the diagram.)
| *1 | SCV | *2 | Plunger |
| *3 | Cam | - | - |
| *a | Plunger Top-Dead-Center | *b | Plunger Bottom-Dead-Center |
| *c | Compression Starting Point | *d | Plunger Stroke |
| *e | Fuel Suction Volume | - | - |