Home › Power Source / Network › NETWORKING › CAN COMMUNICATION SYSTEM › from 2019.08
NM2850E _57 Power Source / Network _074169 NETWORKING _0361176 CAN COMMUNICATION SYSTEM GE GENERAL F

NETWORKING  CAN COMMUNICATION SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

The Controller Area Network (CAN) has been adopted for the some models.


b.

The Controller Area Network (CAN) is a serial data communication network for real time application. It is a multiplex communication network to be equipped in a vehicle, and has communication speeds of 500 kbps (HS-CAN) and 250 kbps (MS-CAN), and the ability to detect malfunctions.


c.

HS-CAN consists of a bus 1, bus 2, bus 4, bus 5, V bus, local bus 1, local bus 2 and local bus 3.


d.

MS-CAN consists of a local bus 4.


e.

The communication wire used is a twisted-pair wire. The bus line has a high line (2.5 V to 3.5 V is applied) and a low line (1.5 V to 2.5 V is applied).


f.

The central gateway ECU (network gateway ECU) has a gateway function and is used to transmit data between bus 1, bus 2, bus 4, bus 5 and V bus.


g.

The translate ECU assembly has a gateway function and is used to transmit data between bus 2, local bus 2 and local bus 3.


h.

The terminating resistors for each bus are located as shown in the following table.

Bus Terminating Resistor Location Gateway Function Gateway Destination

*1: Models without UREA SCR system

*2: Models with UREA SCR system

*3: Models with SRS airbag system

*4: Models without SRS airbag system

*5: Models with A861E automatic transmission

CAN Bus 2
·

Central Gateway ECU (Network Gateway ECU)

·

ECM*1

·

Translate ECU Assembly*2


·

Central Gateway ECU (Network Gateway ECU)

·

Translate ECU Assembly*2


to Each Bus
CAN Bus 4
·

Central Gateway ECU (Network Gateway ECU)

·

Air Bag ECU Assembly*3

·

No. 1 CAN Junction Terminal*4


Central Gateway ECU (Network Gateway ECU) to Each Bus
CAN Bus 5
·

Central Gateway ECU (Network Gateway ECU)

·

Combination Meter Assembly


Central Gateway ECU (Network Gateway ECU) to Each Bus
CAN V Bus Central Gateway ECU (Network Gateway ECU) Central Gateway ECU (Network Gateway ECU) to Each Bus
CAN Local Bus 1*2
·

No. 6 CAN Junction Terminal

·

Transmission Control ECU*5


Translate ECU Assembly to Each Bus
CAN Local Bus 2*2
·

No. 5 CAN Junction Terminal

·

No. 3 CAN Junction Terminal


Translate ECU Assembly to Each Bus
CAN Local Bus 3*2
·

No. 7 CAN Junction Terminal

·

No. 4 CAN Junction Terminal


- -