Home › Engine / Hybrid System › N04C-VQ (ENGINE MECHANICAL) › ENGINE UNIT › from 2019.08
NM2850E _51 Engine / Hybrid System _074232 N04C-VQ ENGINE MECHANICAL _0370071 ENGINE UNIT GE GENERAL F

N04C-VQ ENGINE MECHANICAL  ENGINE UNIT  GENERAL  GENERAL  


OUTLINE


a.

The N04C-VQ engine is an in-line 4-cylinder, 4.0-liter, 16-valve OHV engine. A common-rail system and variable nozzle vane type turbocharger with intercooler are used to realize high output and good fuel economy.



SPECIFICATION


*1: Weight shows the figure with oil and water fully filled.

*2: Models with air conditioner

*3: Models without air conditioner

No. of Cyls. and Arrangement 4-cylinder, In-line
Valve Mechanism 16-valve OHV, Gear Drive
Combustion Chamber Direct Injection Type
Manifolds Cross-flow
Fuel System Common-rail Type
Displacement 4009 cm3 (244.6 cu. in.)
Bore x Stroke 104.0 mm x 118.0 mm (4.09 in. x 4.65 in.)
Compression Ratio 18.0 : 1
Max. Output (EEC) 100 kW @ 2500 rpm
Max. Torque (EEC) 390 N*m @ 1400 rpm
Valve Timing Intake Open 4°BTDC
Close 27°ABDC
Exhaust Open 53°BBDC
Close 17°ATDC
Turbocharger Variable Nozzle Vane Type
Firing Order 1 - 3 - 4 - 2
Fuel Cetane Number 50 or higher
Emission Regulation EURO 4
Engine Service Mass (Reference)*1 385 kg (848.8 lb)*2
380 kg (837.7 lb)*3

Valve Timing
W141067E01
0.594,3.063 2.521,3.292 1.927,0.229 10 false : Intake Valve Opening Angle 0.594,3.448 2.635,3.677 2.042,0.229 10 false : Exhaust Valve Opening Angle 3.49,0.406 3.865,0.635 0.375,0.229 10 false TDC 3.5,3.094 3.875,3.323 0.375,0.229 10 false BDC 4.458,2.438 4.833,2.667 0.375,0.229 10 false 53° 3.875,0.677 4.25,0.906 0.375,0.229 10 false 17° 3.021,2.76 3.396,2.99 0.375,0.229 10 false 27° 3.396,0.656 3.625,0.906 0.229,0.25 10 false 4°


MAIN FEATURES


a.

This engine is able to achieve the following through the use of the items listed below:

i.

High output


ii.

Good fuel economy


iii.

Clean exhaust gases


iv.

Low noise and low vibration


v.

Weight reduction

Item (1) (2) (3) (4) (5)

○: Applicable

-: Not Applicable

Cylinder Head Cover Sub-assembly - - - ○ -
Full Jacket Type Water Jacket ○ ○ ○ - -
High-precision Timing Gear Train - - - ○ -
Highly Rigid Push Rod ○ - - - -
Lightweight and Highly Rigid Piston - ○ - ○ ○
Optimal Combustion Chamber Shape ○ ○ ○ - -
Highly Rigid Crankshaft ○ - - ○ -
Piston Skirt Coating - - - ○ -
Venturi Assembly - - - ○ -
Air-cooled Type Intercooler ○ ○ ○ - -
Variable Nozzle Vane Type Turbocharger ○ ○ ○ - -
Common-rail System ○ ○ ○ ○ ○
Diesel Oxidation Catalytic Converter - - ○ - -
Multiple-orifice, Small-diameter Injector ○ ○ ○ ○ -
Water-cooled Type EGR Cooler Sub-assembly - ○ ○ - -
Closed Breather Type Blowby Gas Recirculation System - - ○ - -