CONSTRUCTION
An After Turbo Catalyst (ATC) is provided for the front exhaust pipe assembly, an oxidation catalyst and DPR catalyst are provided for the No. 1 exhaust pipe converter assembly, and an SCR catalyst and ammonia slip catalyst are provided for the No. 2 exhaust pipe converter to achieve low emissions.
| *1 | Turbocharger Sub-assembly | *2 | Exhaust Manifold |
| *3 | Exhaust Retarder Assembly | *4 | Front Exhaust Pipe Assembly
·
ATC (After Turbo Catalyst) |
| *5 | Front No. 2 Exhaust Pipe Sub-assembly | *6 | No. 1 Exhaust Pipe Converter Assembly
·
Oxidation catalyst ·
DPF Catalyst |
| *7 | Center Exhaust Pipe Assembly | *8 | No. 2 Exhaust Pipe Converter Assembly
·
SCR Catalyst ·
Ammonia Slip Catalyst |
| *9 | Exhaust Tail Pipe Assembly | - | - |
| *a | Ball Joint Portion | - | - |
Ball joint is used to join the front No. 2 exhaust pipe sub-assembly and No. 1 exhaust pipe converter assembly. As a result, a simple construction and reliability are realized.
| *1 | Front No. 2 Exhaust Pipe Sub-assembly | *2 | No. 1 Exhaust Pipe Converter Assembly |
| *a | Gasket | - | - |
An exhaust retarder assembly is used. The engine braking effect is boosted by closing a valve provided in the exhaust pipe and narrowing the exhaust gas passage