SYSTEM CONTROL
A UREA SCR system is used to purify NOx in the exhaust gas. The urea SCR system injects urea solution into the exhaust gas to generate ammonia. The generated ammonia produces a chemical reaction with the NOx in the exhaust gas on the SCR catalyst, breaking it down into nitrogen and water, thereby purifying the exhaust gas.
The UREA SCR system is composed of a emission control ECU assembly, urea tank sub-assembly, urea injector assembly, urea pump, No. 5 exhaust gas temperature sensor, No. 1 nitrogen oxides sensor and No. 2 nitrogen oxides sensor.
In the UREA SCR system, the emission control ECU assembly controls the urea injector set and urea pump based on various signals.
The amount of NOx in the exhaust gas increases as the engine load increases. This system injects urea solution according to the engine load in order to maintain the amount of NOx at a certain level or less.
When the SCR catalyst temperature reaches a certain temperature or more, such as when high-load driving continues for a long period of time or DPF regeneration is in progress, the amount of urea solution that is injected is further increased.
The amount of urea solution that is consumed changes depending on the driving conditions and environment. During high-load driving, the amount of urea solution that is consumed increases and the driving range decreases. Inversely, during low-load driving, the amount of urea solution that is consumed decreases and the driving range increases.