Home › Engine / Hybrid System › N04C-WA (FUEL) › FUEL SYSTEM › from 2019.08
NM2850E _51 Engine / Hybrid System _083718 N04C-WA FUEL _0403930 FUEL SYSTEM DE DETAILS F

N04C-WA FUEL  FUEL SYSTEM  DETAILS  INJECTOR  


CONSTRUCTION


a.

Because this system uses solenoid injectors in which solenoid valves open and close the fuel passages, the ECM can precisely control the fuel injection volume and injection timing. Thus, this system minimizes the generation of black smoke, which is peculiar to diesel engines.


b.

Each injector consists of a nozzle needle, piston, and solenoid valve.


c.

An injector compensation value and QR (Quick Response) code containing encoded characteristics of the injector are printed on each injector.


d.

The injector compensation value and QR code contain various pieces of information regarding the injector, such as model code and injection volume values.

W137012C02
3.594,1.01 3.927,1.01 true 3.094,1.115 2.76,0.979 2.76,0.979 3.125,0.927 true 2.563,0.885 2.802,1.156 0.24,0.271 10 false *a 3.979,0.948 4.26,1.25 0.281,0.302 10 false *b
*a Injector Compensation Value *b QR Code




OPERATION


a.

Current flows through the solenoid coil and the valve is pulled up.


b.

Fuel flows out from the orifice (out) in the control chamber.


c.

The fuel pressure in the control chamber drops.


d.

The nozzle needle moves up due to the differential pressure above and below the nozzle needle.


e.

Fuel is injected through the nozzle.


f.

Current through the solenoid coil is stopped and the control valve is closed.


g.

Fuel flows into the control chamber through the orifice (in) and the control plate moves down.


h.

The pressure in the control chamber increases causing the force acting above and below the nozzle needle to reverse due to the fuel pressure.


i.

The nozzle needle moves down and closes to stop injection.


j.

When the control chamber pressure equalize, the control plate rises due to the force of the spring.

W123659C01
1.583,1.719 2.063,1.583 true 0.625,1.125 1.073,1.385 true 0.635,1.75 1.406,1.865 true 0.677,2.188 1.292,1.927 true 2.083,2.406 1.531,2.031 true 0.479,1 0.792,1.156 0.313,0.156 10 false *1 0.49,1.646 0.802,1.802 0.313,0.156 10 false *2 0.521,2.104 0.833,2.26 0.313,0.156 10 false *3 2.104,1.479 2.417,1.635 0.313,0.156 10 false *4 2.115,2.333 2.427,2.49 0.313,0.156 10 false *5 1.344,3.344 1.656,3.5 0.313,0.156 10 false *a 3.521,3.354 3.833,3.51 0.313,0.156 10 false *b 5.719,3.333 6.031,3.49 0.313,0.156 10 false *c
*1 Control Valve *2 Out-orifice
*3 Control Plate *4 In-orifice
*5 Control Chamber - -
*a Before fuel injection *b Fuel injection
*c After fuel injection - -
V100144

High Fuel Pressure
V100145

Low Fuel Pressure