CONSTRUCTION
A No. 1 nitrogen oxides sensor has been positioned in the No. 1 exhaust pipe converter assembly and a No. 2 nitrogen oxides sensor has been positioned in the No. 2 exhaust pipe converter assembly to detect the exhaust gas condition.
The No. 1 nitrogen oxides sensor and No. 2 nitrogen oxides sensor are composed of the sensor unit and SCU (sensor control circuit).
The sensor output consists of changes in the electrical current that are detected by the sensor unit, converted from analog signals to digital signals by the SCU (sensor control circuit) and sent as digital data to the ECM.
The SCU heats the heater built into the sensor to maintain the No. 1 nitrogen oxides sensor and No. 2 nitrogen oxides sensor at a constant temperature.