Home › Engine / Hybrid System › N04C-WA (ENGINE MECHANICAL) › ENGINE UNIT › from 2019.08
NM2850E _51 Engine / Hybrid System _083717 N04C-WA ENGINE MECHANICAL _0403931 ENGINE UNIT GE GENERAL F

N04C-WA ENGINE MECHANICAL  ENGINE UNIT  GENERAL  GENERAL  


OUTLINE


a.

The N04C-WA engine is an in-line 4-cylinder, 4.0-liter, 16-valve OHV engine. A common rail system and variable nozzle vane type turbocharger with intercooler are used to realize high output and good fuel economy.


b.

For the N04C-WA engine, a DPF (Diesel Particulate Filter) system and UREA SCR system are used to realize clean exhaust emissions.



SPECIFICATION


*1: Weight shows the figure with oil and water fully filled.

*2: Models with manual transmission

*3: Models with automatic transmission

No. of Cyls. and Arrangement 4-cylinder, In-line
Valve Mechanism 16-valve OHV, Gear Drive
Combustion Chamber Direct Injection Type
Manifolds Cross-flow
Fuel System Common-rail Type
Displacement 4009 cm3 (244.6 cu. in.)
Bore x Stroke 104.0 mm x 118.0 mm (4.09 in. x 4.65 in.)
Compression Ratio 18.0 : 1
Max. Output (EEC) 110 kW @ 2500 rpm
Max. Torque (EEC) 420 N*m @ 1400 rpm
Valve Timing Intake Open 14°BTDC
Closed 42°ABDC
Exhaust Open 53°BBDC
Closed 17°ATDC
Turbocharger Variable Nozzle Vane Type
Firing Order 1 - 3 - 4 - 2
Fuel Cetane Number 50 or higher
Emission Regulation EURO 6
Engine Service Mass (Reference)*1 387 kg (853.2 lb)*2
371 kg (817.9 lb)*3

Valve Timing
W141234E01
0.583,3.052 2.448,3.344 1.865,0.292 10 false : Intake Valve Opening Angle 0.594,3.458 2.771,3.708 2.177,0.25 10 false : Exhaust Valve Opening Angle 3.5,0.396 3.865,0.698 0.365,0.302 10 false TDC 3.51,3.073 3.875,3.375 0.365,0.302 10 false BDC 3.219,0.625 3.521,0.854 0.302,0.229 10 false 14° 3.885,0.646 4.188,0.875 0.302,0.229 10 false 17° 4.438,2.49 4.74,2.719 0.302,0.229 10 false 53° 2.844,2.667 3.146,2.896 0.302,0.229 10 false 42°


MAIN FEATURES


a.

This engine is able to achieve the following through the use of the items listed below:

i.

High output


ii.

Good fuel economy


iii.

Clean exhaust gases


iv.

Low noise and low vibration


v.

Weight reduction

Item (1) (2) (3) (4) (5)
DPF System - - ○ - -
No. 2 Cylinder Head Cover - - - ○ -
Full Jacket Type Water Jacket ○ ○ ○ - -
High-precision Timing Gear Train - - - ○ -
Highly Rigid Push Rod ○ - - - -
Lightweight and Highly Rigid Piston ○ ○ ○ ○ ○
Optimal Combustion Chamber Shape ○ ○ ○ - -
Highly Rigid Crankshaft ○ - - ○ -
Piston Skirt Coating - - - ○ -
Throttle Body - ○ ○ ○ -
Air-cooled Type Intercooler ○ ○ ○ - -
Variable Nozzle Vane Type Turbocharger ○ ○ ○ - -
Common Rail System ○ ○ ○ ○ ○
DPF Catalytic Converter - - ○ - -
Multiple-orifice, Small-diameter Injector ○ ○ ○ - -
EGR System - ○ ○ - -
Water-cooled Type EGR Cooler - ○ ○ - -
Blowby Gas Recirculation System - - ○ - -