Home › Engine / Hybrid System › N04C-WA (ENGINE CONTROL) › ECD SYSTEM › from 2019.08
NM2850E _51 Engine / Hybrid System _083716 N04C-WA ENGINE CONTROL _0403932 ECD SYSTEM CO CONTROL F

N04C-WA ENGINE CONTROL  ECD SYSTEM  CONTROL  ENGINE CONTROL  


FUNCTION OF MAIN COMPONENTS


a.

The main components of the engine control system are as follows:

Component Outline
ECM The ECM performs overall control of the engine control system to suit the operating conditions of the engine in accordance with the signals provided by the sensors.
Intake Air Temperature Sensor Detects the intake air temperature in the intake manifold.
Intake Air Temperature Sensor (for Intercooler Side) Detects the intake air temperature in positions behind the intercooler assembly.
Engine Coolant Temperature Sensor Detects the water temperature.
Fuel Pressure Sensor Detects the fuel pressure in the common-rail.
Fuel Temperature Sensor Detects the fuel temperature in the supply pump.
Turbo Pressure Sensor Detects the intake air pressure in the intake manifold.
Crankshaft Position Sensor Detects the engine speed from the crankshaft position.
Camshaft Position Sensor Identifies the cylinder from the rotation of the rotor.
Mass Air Flow Meter Assembly (Includes Atmospheric Temperature Sensor) Uses a hot wire to detect the intake air flow mass.
Starter Signal Detects the starter voltage signal at the time the engine is started.
Vehicle Speed Sensor Detects the vehicle speed.
Accelerator Pedal Position Sensor Mounted on the accelerator pedal. Detects the position of the accelerator pedal.
EGR Valve Position Sensor Detects the EGR valve position and sends signals to the ECM.
Differential Pressure Sensor Measures the pressure differences in positions in front of and behind the DPF catalytic converter.
Exhaust Gas Temperature Sensor (for EGR Cooler Sub-assembly Side) Detect the temperature of the exhaust gas in positions behind the EGR cooler assembly.
Exhaust Gas Temperature Sensor Detect the temperature of the exhaust gas in positions behind the ATC (After Turbo Catalyst).
No. 2 Exhaust Gas Temperature Sensor Detect the temperature of the exhaust gas in positions in front of the catalytic converter.
No. 3 Exhaust Gas Temperature Sensor Detect the temperature of the exhaust gas in positions in front of the DPF catalytic converter.
No. 4 Exhaust Gas Temperature Sensor Detect the temperature of the exhaust gas in positions behind the DPF catalytic converter.
No. 5 Exhaust Gas Temperature Sensor Detect the temperature of the exhaust gas in positions in front of the SCR catalytic converter.
No. 1 Nitrogen Oxides Sensor Detects the concentration of NOx in the exhaust gas in positions behind the DPF catalytic converter.
No. 2 Nitrogen Oxides Sensor Detects the concentration of NOx in the exhaust gas in positions behind the SCR catalytic converter.
Particulate Matter Sensor Detects the state of DPF.
Emission Control ECU Assembly Controls the UREA SCR system based on various signals.
Throttle Body Assembly Throttle Position Sensor Detects the opening angle of the throttle valve.
Throttle Control Motor Uses a step motor to restrict the intake passage.
Injector Assembly Precisely injects fuel.
Suction Control Valve Controls the volume of fuel to be supplied to the supply pump.
Pressure Discharge Valve The pressure discharge valve regulates the fuel pressure.
Exhaust Retarder Solenoid with Bracket Assembly Opens and closes the exhaust retarder.
Fuel Addition Cut Valve Assembly Shuts off the fuel supply to the exhaust fuel addition injector assembly when a malfunction occurs.
Turbocharger Sub-assembly Nozzle Vane Position Sensor This sensor detects the nozzle vane position.
DC Motor Controls the variable nozzle vane according to signals from the ECM.
Exhaust Fuel Addition Injector Assembly Adds fuel inside the exhaust manifold.