FUNCTION
In the common rail system, the pressurized fuel provided by the injection or supply pump is stored in the common rail assembly and injected by the solenoid injectors.
The common rail system stores the fuel, which has been pressurized by the pump, in the common rail assembly. Because the common rail assembly constantly accumulates a stable injection pressure without being affected by engine speed or load, this system is able to constantly provide a stable injection pressure, even when the engine is operating at low speeds.
The ECM transmits signals to the injector solenoid valves in order to precisely control the fuel injection timing and injection volume.
| *1 | Crankshaft Position Sensor | *2 | Accelerator Pedal Position Sensor |
| *3 | Intake Air Temperature Sensor | *4 | Engine Coolant Temperature Sensor |
| *5 | Mass Air Flow Meter Sensor Subassembly | *6 | Camshaft Position Sensor |
| *7 | Exhaust Gas Temperature Sensor | *8 | Differential Pressure Sensor |
| *9 | No. 1 Nitrogen Oxides Sensor | *10 | ECM |
| *11 | Fuel Addition Cut Valve Assembly | *12 | Fuel Pressure Sensor |
| *13 | Exhaust Fuel Addition Injector | *14 | Fuel Tank Sub-assembly |
| *15 | Injection or Supply Pump Assembly | *16 | Fuel Temperature Sensor |
| *17 | Diesel Fuel Filter Assembly | *18 | Fuel Filter Assembly |
| *19 | Injector Assembly | *20 | Common Rail Assembly |
| *21 | Fuel Pressure Sensor (for Common Rail Assembly) | *22 | Fuel Pressure Limiter |
| *23 | Pressure Discharge Valve | *24 | Intake Air Temperature Sensor (for Intercooler Side) |
| *25 | SCV (Suction Control Valve) | - | - |