FUNCTION OF MAIN COMPONENTS
| Component | Function | |
|---|---|---|
|
*1: Models with automatic door emergency switch assembly *2: Models with A444E automatic transmission |
||
| Automatic Door Unit (Automatic Door Regulator Motor Assembly) | Cancel Switch (Power Slide Door Main Switch) | Switches the automatic function for the glide door on/off. |
| Motor | Opens and closes the glide door under the control of the automatic door ECU. | |
| Magnetic Clutch | Turns the glide door drive motor drive force on and off. | |
| Pulse Sensor (Door Sensor) | Detects the glide door operation status. | |
| Glide Door Lock Assembly FR/RR | Closer Motor | Operates under the control of the automatic door ECU to fully close the glide door from an ajar position. |
| Half Latch Switch | Detects the latch position. | |
| Full Latch Switch | ·
Detects the latch position. ·
Turns the CTY relay on when the glide door is fully closed. |
|
| Pawl Switch | Detects that the pawl and latch are engaged. | |
| Neutral Position Switch | Detects the closer motor position. | |
| Door Control Motor Assembly | Latch Release Motor Assembly | Unlocks the glide door lock assembly and glide door open lock assembly. |
| Neutral Position switch | After releasing the lock, it detects that the motor has returned to its original position and then outputs this to the automatic door ECU to stop the motor from operating. | |
| Release Position Switch | Detects that the motor has rotated to the lock release position and then outputs it to the automatic door ECU to reverse the rotation direction of the motor. | |
| Automatic Door ECU (Automatic Door Control Relay Assembly) | Operates the glide door drive motor, magnetic clutch and closer motor and performs system control based on input signals. | |
| Glide Door Open Lock Assembly
·
Door Lock Switch |
·
Locks the glide door in the fully closed position. ·
Detects that the glide door open lock assembly is in the door locked state, and then outputs it to the automatic door ECU. |
|
| Glide Door Lock Remote Control Assembly | Handle Switch (Open) | Detects whether the inside handle or outside handle is being operated and outputs the result to the automatic door ECU. |
| Handle switch (Close) | ||
| Door Control Switch | Sends glide door open/close operation signals to the automatic door ECU. | |
| Accelerator Interlock Actuator Assembly | ||
| Automatic Door Emergency Switch Assembly (Door Control Switch Assembly)*1 | ||
| Shift Lock Control Computer*2 | The shift position P position is detected and output to the automatic door ECU. | |
| Combination Meter Assembly | ·
Sends the vehicle speed signal to the automatic door ECU. ·
Turns the center door warning light on when the glide door is ajar. ·
Turns the automatic door OFF indicator light on if the cancel switch of the automatic door unit is on. |
|
| Outside Buzzer (Buzzer Assembly) | Sounds when the system operates and when there is a malfunction. | |
| CTY Relay | Switches between on/off according to whether the glide door is open or closed. | |
OPERATING CONDITION
When all of the following conditions are met, the power glide door system can operate.
|
*: Models with A444E automatic transmission |
·
Cancel switch is off. ·
IG ON ·
Shift position "P" * ·
The vehicle speed is 3 km/h or less |
FUNCTION
| Function | Outline |
|---|---|
| Automatic Open/Close Control | Automatically opens and closes the glide door by operating the door control switch. |
| Jam Protection Control | Reverses and then stops the open/close operation of the power glide door if there is an excessive load on the glide door or a jam is detected during automatic operation. |
| Interrupt Control | Performs automatic operation only if the door control switch operation state is retained. Stops automatic operation and retains the magnetic clutch if switch operation is suspended. |
| Strong Brake Control | Operates the magnetic clutch and reduces the glide door movement speed if the glide door movement speed exceeds a specified value when opening or closing the glide door (only when the power slide door main switch is on). |
| Continuous Clutch Control (Strong) | Operates the magnetic clutch and prevents the glide door from being left open if the glide door is fully closed and then opened while the vehicle is being driven or if the vehicle is driven during automatic operation. |
| Intermittent Clutch Control | Intermittently operates the magnetic clutch and reduces the glide door movement speed if a pulse sensor (door sensor) malfunction, door position malfunction, or a jam during a reverse operation caused by a jam occurs during a glide door open/close operation. |
| Closer Function | Automatically fully closes the glide door if it becomes ajar. |
Automatic Switching Control
Door Control Switch (Open) Operation
Door Control Switch (Close) Operation
Jam Protection Control
The automatic door ECU detects that there is an excessive load on the glide door based on changes in the glide door drive motor rotational speed. If this occurs, the automatic door ECU reverses and then stops the power glide door.
| Detection Method | Control | |
|---|---|---|
| Glide door drive motor rotational speed change | Automatic glide door operating (close) | Reverses and stops |
| Automatic glide door operating (open) | Reverses and stops | |
Strong Brake Control
Operates the magnetic clutch to reduce the glide door movement speed if the glide door movement speed exceeds a specified value due to a manual open/close operation or due to the weight of the glide door itself.
When all the following conditions are met and the moving speed of the glide door is above the specified level (about 250 mm / sec), the strong brake control is started. In addition, the strong brake control is ended when the glide door is locked in the fully closed or fully open position.
·
Cancel switch is off ·
The glide door is not in the fully closed position |
Continuous Clutch Control (Strong)
Operates the magnetic clutch and prevents the glide door from being left open if the glide door is fully closed and then opened while the vehicle is being driven or if the vehicle is driven during automatic operation.
Operates when the following conditions are met.
·
After the glide door is fully closed, the main switch is on, a vehicle speed of 3 km/h or higher is detected and the glide door is not fully closed ·
A vehicle speed of 3 km/h or higher is detected during automatic open/close operation |
Stops continuous clutch control (strong) if any of the following conditions are met after control has started.
·
Cancel switch is on ·
The magnetic clutch is fully powered continuously for 5 seconds ·
The easy closer function is operated (when the cancel switch is off) ·
The glide door is fully closed or fully opened |
Intermittent Clutch Control
Intermittently operates the magnetic clutch and reduces the glide door movement speed if a pulse sensor (door sensor) malfunction, door position malfunction, or a jam during a reverse operation caused by a jam cannot be normally detected.
Starts intermittent clutch control if the following condition is met. Stops control approximately 113 seconds after control starts, or when the glide door is fully closed.
·
A pulse sensor (door sensor) malfunction, door position malfunction, or a jam during reverse operation is detected during a glide door open or close operation |
Closer Function
Operates the closer to ensure the door is fully closed when both the front and rear glide door lock assemblies are ajar. Does not operate the closer if only one side is ajar.
Stops the operation of both closers at the same time if a handle operation is detected or if the door control switch is operated in the door opening direction while the closer is operating.