Home › Vehicle Exterior › DOOR / HATCH › AUTOMATIC DOOR SYSTEM (for Folding Type) › from 2019.08
NM2850E _59 Vehicle Exterior _074161 DOOR / HATCH _0361248 AUTOMATIC DOOR SYSTEM(for Folding Type) CO CONTROL F

DOOR / HATCH  AUTOMATIC DOOR SYSTEM(for Folding Type)  CONTROL  AUTOMATIC DOOR CONTROL  


FUNCTION


a.

Door Open/Close Control Function

i.

This function opens/closes the door according to auto center door control ECU (No. 2 automatic door control relay assembly) control when the door control switch is operated.



b.

Door Automatic/Manual Switching Function

i.

This function electronically switches between automatic/manual operation according to cancel switch (power slide door main switch) operation.



c.

Interlock Function

i.

This function prohibits depression of the accelerator pedal when the door is open.



d.

Jam Protection Function

i.

This function detects jams using the pulse sensor (Hall IC) and slightly reverses and stops* the door open/close operation.

HINT:

*: For models for Taiwan, when a jam is detected during a close operation, the door automatically operates in reverse until it is fully open, and then stops.





OPERATING CONDITION


a.

If a jam is detected during a door open/close operation, the auto center door control ECU (for folding door) reverses and stops the open/close operation.


b.

The auto center door control ECU (for folding door) automatically performs an open/close operation when the following conditions are met.

Auto Center Door (For Folding Door) Open/Close Operation Conditions
Cancel switch is off
IG ON
The vehicle speed is 3 km/h or less